| Thread | Last Post | Replies |
|
| Removing Resonator from Exhaust 96 Sentra | 30 Sep 2009 00:40 GMT | 13 |
Is it common, or even doable, to delete the resonator from the exhaust, on a 96 Nissan Sentra ? My gf's Sentra has an exhaust leak at the connection between the pipe and the resonator (not the muffler). I can't tell if the resonator is rotted away there too,
|
| Air compressor. | 28 Sep 2009 17:10 GMT | 8 |
This morning, I removed the two plastic case halves of my light weight SpeedAire air compressor, Model 5F239-7 1 3/4 horsepower, 125 psi. It is a single piston air compressor.I discovered why it doesn't pump
|
| Waxing/polishing vehicles. | 27 Sep 2009 18:24 GMT | 24 |
Next time I wash my vans, I am going to wax/polish them, with an electric polishing thingy I will soon buy wherever. Which wax/polish is the best? What do you use on your vehicle? cuhulin
|
| Bumper Question | 26 Sep 2009 01:03 GMT | 9 |
There is a rubber strip (about an inch wide) that was attached to the bottom of the front bumper (full width) on my 2007 Odyssey. It was rubbed off by a tall parking lot cement curb. What is it called? What is its purpose? It doesn't seem to me that only one tiny inch would
|
| buying tires online? | 26 Sep 2009 01:01 GMT | 3 |
thanks for all the informative responses to my previous post on buying cheap Chinese tires. I don't really want to be buying tires again in another few years because Chinese ones wore out, so I'll get a better brand. Is it a good idea to buy tires online? By the time that I pay a ...
|
| FAKE oil pump. | 26 Sep 2009 00:45 GMT | 10 |
I have an oil pump like the kind that is suppose to pump oil up through the dipstick tube.I bought it at the Goodwill store this afternoon.It looks brand new, still in the box.I hooked it up, only to see what it will do.It made a loud whizzing noise.It didn't pump anything at all.
|
| Cowling slots. | 23 Sep 2009 00:47 GMT | 4 |
My 1978 Dodge van and my 1983 Dodge van have verticle slots (ventilation slots?) in the cowl panels above the engine hoods.What is the purpose of those slots? other than letting a lot of leaves fall down and get under there.
|
| Revolutionary discovery means world may never run out of crude. | 22 Sep 2009 13:43 GMT | 18 |
www.libertypost.org/cgi-bin/readart.cgi?ArtNum=273532 That is what I think too, ever since a few years ago. We will never run out of crude. cuhulin
|
| Tires/Wheels: P215/65R16 vs. P225/60R16 - Interchangeable? | 22 Sep 2009 03:41 GMT | 5 |
We have two Chryslers with the following tire sizes 1995 Chrysler Concorde - p225/60r1 2001 Town & Country Minivan - p215/65r1 The Concorde is at the end of its life but the tires (Michelin) are i
|
| what about Chinese tires? | 21 Sep 2009 18:11 GMT | 21 |
when will prices rise as a result of the tariff? or have they risen in advance already? is it worth it looking around for low end tires from countries other than China? I only drive several thousand miles per year, and don't want to pay a
|
| Old one cylinder oiless tankless air compresser. | 18 Sep 2009 23:51 GMT | 15 |
This morning I was using it to air up a tire.The usual sound of it was always a loud knocking noise when it was working ok.This morning it was working ok for a few minutes and then it started making a soft thumping noise and not pumping any air.I think the air compresser dates back ...
|
| Question about GM Heater Hose fitting | 17 Sep 2009 03:26 GMT | 10 |
Recently one or both of my heater hoses started leaking. In attempting to replace them, I noticed some strange fittings at the ends of the metal tubes the hoses connect to. When removing the spring clamp, the tip of one of them actually cracked off and broke.
|
| Replacing Seat Belt and Air Bag after Collision | 17 Sep 2009 00:44 GMT | 12 |
I have an '04 Nissan Frontier that was hit head-on and the driver's air bag deployed. I repaired/replaced everything that was damaged except the air bag (so far, still working on it). The driver's seat belt is stuck in place and will not pull out or retract. Does this have ...
|
| Corolla FX 1988 not FX16 shifting (MT) | 16 Sep 2009 20:51 GMT | 2 |
This is a 1988 Corolla FX (not an FX16 :( ) with 188,000 miles on it. When shifting through the gears, if the lever is in 1st, 3rd or 5th, stepping on the gas makes the lever move about 1/2-3/4" in one direction, and letting off the gas moves the lever back the same amount.
|
| I've replaced the starter, but... | 15 Sep 2009 20:09 GMT | 10 |
I've replaced the starter, but when I try to start my 2002 Taurus, it just goes CLICK, CLICK, CLICK... ... and when I disconnected the lead to the "S" terminal and tried jumping it to the positive battery terminal, it just goes CLICK,
|