I need some advice about replacing the sealant around the top vent on
my pop-up.  The stuff that is there now is hard and cracked.  I've
sealed the cracks with silicone sealant but it looks pretty ugly.
Any one have experience resealing the crank up vent?

I am having a problem with my RV air conditioner. It is not cooling like it
used to. I've talked to three RV dealers. Two of them say they don't fix
them, but they will replace it at the tune of about slightly less than $800.
Does this sound correct.

I was wondering if anyone here has or has used a propane fogger, insect
control device, at the camp site?  What are the costs of operation and how
well does it work?   It seems like it could be nice for some more rustic
areas where black flies or deer flies can be kind of tough.  Do ...

Hi all, first of all I'm new at this and I hope you can help me in answering
some of my questions about our newly acquired Starcraft pop up.
When I went to check the battery I found the connections were not attached
and I'm not sure of the correct sequence.  I have three ...

Hello!  My husband & I purchased a 2000 Coleman Mesa new, and over the past
year the roof gasket has begun to separate from the roof where it is
attached.  My best friend owns a 2000 Utah and has the same problem,
although hers is in much worse shape.  We have re-glued it with a ...

Hey all-
 I'm running the gamut here with beginner's questions.    Hopefully
once I get my trailer and get some experience I'll be able to
contribute some answers instead of just questions.  I'm  familiar with

Hello group,
i am a new lurker in this group for a few weeks and would like your opinion
on the Coachman Spirit 1006ST if possible.  any thing this popup is good/bad
at let me know.  comparisons to other popups appreciated.

Trailer : 2002 Jayco Qwest 10X.  Unloaded vehicle weight w/ std equip.
1220 lbs.  We do not have bike carrier, canoe, furnace, fridge, etc.,
so the actual weight with cargo does not go much above this amount.
Vehicle being considered: 2005 Honda Pilot LX.  Here is info from

Need about 15 ft of white 1" plastic t-molding for my '99 Jamboree.
Anyone know where to get it?
TIA, Dick

Hey all-
 I've been reading the other thread about the charge wire to a
trailer.  I'm about to set up something similar, and wanted to run what
I know against those on this group that know about the subject.

i usually post in the rec.windsurfing group.  I am in the market for a pop
up trailer and realized that you guys can probably help me on a water system
i need for my sailing needs.  I need a system with about 15 gallons of fresh
water that i can use in a shower, spray hose (for ...

I deperately need a bunk cover (blue) for a Coachman Clipper. Does
anybody know where I can get one? (I guess you call it a 'bunk cover':
I'm talking about the thing that covers the foam that you sleep on.)
Christopher A. Steele

Or is it stupid to think that I can remove the top window in  the top of the
front of my class c and fill it back in with plywood and or strifoam .Then
fiberglass over that , sand it down and paint it and stop the leaking . If I
remove the window, what can I replace it with to ...

These are the plastic screw in type that mount over the hood hatches.
Anyone have any idea where I might order online?
Bax
The Bax

Does anyone have experience installing a grab handle to a trailer? How is it
secured - are there tricks to screwing it into the trailer walls? Should I
just pay to get one installed?
don