| Thread | Last Post | Replies |
|
| What does X11 mean? - 69 Camaro | 31 Jan 2004 06:47 GMT | 5 |
I have a 69 Camaro with X11 on the Cowl tag. Can someone tell me what options this number implies. My car needs restoration work. Thanks,
|
| estimate for a new clutch? 02 SS | 28 Jan 2004 14:28 GMT | 6 |
well, looks like this newsgroup has turned into a money making scam fest.... anyways, i have a 2002 SS 6 speed with 22,000 miles on it.. everytime i change gears, usually 1-4, and into reverse, i hear a loud clunk comming
|
| 94 Camaro LT1/Engine Stumble or Hesitation at 1/2 Throttle | 27 Jan 2004 21:45 GMT | 2 |
What could be causing an engine stumble/hesitation at half throttle when accelerating or under load, this only happens after the car is fully warmed up? Also, any clue on how to increase heater output, once the mercury drops
|
| Borg Warner 4 speed -- need opinions | 26 Jan 2004 15:05 GMT | 6 |
I own a 68 Camaro 350 SB, with a TH350 (same one I've asked for advice on this newsgroup before), w/console and floor shifter, and I'm considering converting to a 4 speed. A guy I know offered to sell me
|
| Replacing Engine | 26 Jan 2004 13:22 GMT | 1 |
ok, anyone knows the law in Calif about replacing engines? Would like to replace my 305 TBI with a 350 TPI thanks
|
| please dont kill me for this question | 25 Jan 2004 00:07 GMT | 2 |
anyone ever heard of a twin turbo setup for a 3.1L camaro? ive seen one on a v8, but i was wondering bout how much one might cost
|
| Ever installed a vinyl top on a first gen Camaro? | 24 Jan 2004 23:59 GMT | 5 |
Does anyone know the approximate cost of installing a vinyl top on a 1968 Camaro hardtop? I've always liked the look of the vinyl top, but it's a project I never tried, is it better to let the body shop do this job?
|
| Replace My Engine | 23 Jan 2004 21:10 GMT | 1 |
I need anybody and everybodies input... I have to replace my 305 in my 92 Chevrolet Camaro. Do I use an Advance Auto rebuilt motor or a Jasper rebuilt motor? Why one over the other?
|
| Engine Swap 2.8 for 5.0 in an 86 Camaro | 22 Jan 2004 14:04 GMT | 5 |
My son wants to swap out his tired 2.8 for a 5.0 which he can get for a good price. What additional parts would he also have to replace (tranny ... he has an auto, drive shaft, rear end, etc), and are there any problems to look for?
|
| 2000 V6 Camaro - Need Advice | 21 Jan 2004 15:20 GMT | 6 |
I bought a 2000 Camaro-V6 back in November. It had only 17000 actual miles on it at the time of purchase. I'd like to start doing modifications to it to increase power and make it look better.
|
| Question about tranny fluid | 21 Jan 2004 02:50 GMT | 2 |
Just put a new hughes turbo 350 transmission in my 70 camaro. Hughes was very unspecific about the type of fluid. They first said type F but then said that GM's Decron Mecron III was fine. I told them that after break-in I was going to put in Redline Synthetic.
|
| supercharger and headers | 20 Jan 2004 21:05 GMT | 1 |
I have a 98 camaro 3.8L with magnaflow exhaust, I can't find headers nowhere for a 6cyl that's a good brand and good power gain's. As for the supercharger i'm blown away that I can't find a single one besides a electricle one.
|
| Working principle of the Flowtech Afterburner? | 20 Jan 2004 04:49 GMT | 3 |
ok, I know this is a controversial product that some say sucked big time. I'm not here to start a war on whether it works or not, but just wanna find out at least the theory of how it's supposed to work. From its design, and even from the cut-away diagram, I simply can't figure
|
| Aftermarket seats for a 1981? | 19 Jan 2004 10:45 GMT | 1 |
Can anyone point me in a good direction? I would like some semi-race style seats that can still slide and tilt forward for rear seat entry. I've looked around quite a bit but can't seem to find anything worth a sh.t.
|
| Vote on what concerns you most when buying a used car--See results of Poll | 16 Jan 2004 15:54 GMT | 1 |
Vote on what concerns you most when buying a used car Condition of the car or honesty of salesman http://www.thriftmeister.com/poll.htm
|