tm trying to find a model car of a 1992 25th Anniversary edition Camaro... Ive
looked at several places but havent found one,... I figured it being a
anniversary year it would be easy to find but I guess im wrong...any help is
greatly appreciated

I have an '86 350 and the flywheel grinds on the starter. Have replaced
starter and flywheel and problem persists. Any ideas of the underlying
cause?

After a forced absence due to work stuff, I'm busy sorting out my 84
Berlinetta ready for the summer. She's already had the usual tweaks, holley
carb, edelbrock manifold, crane cam and a half-decent exhaust but I'm still
plagued by a problem where she won't respond to a rapid tap on ...

I have a stock 91z28 and now it keeps blowing starters.  Everyone I took the
car to said the wiring to the starter is fine.  Any ideas?  i'm on my 4th in
2 weeks :(
thanks,

anyone have schematics for this?
apparently the manual I have says this model/year of camaro is different
from all the rest?!
please help

I have a 1999 camaro v-6 standard tranny 5 speed. When I start the car it
makes a chattering noise at idle. when I put in a gear and let off of the
clutch and give fuel it makes it louder. seems to get less noisy as the
engine warms up. I thought it was the rear end until it started ...

John J if your still posting e-mail me.
Having Problems
Ken

1968 Camaro for sale, Minnesota/Wisconsin border area. This was a California
Camaro, it was recently restored and I had it shipped here to Wisconsin, so
as far as I know it has never seen snow. I prefer to sell it locally ( I
live just east

   Car runs outstanding then horrible. Also sometimes hard starting.
Replaced cap, rotor, wires, plugs, fuel filter, air filter, then checked
ignition timing. Timing good when engine runs good, advance not very
responsive when engine runs bad. Also erratic spark when running ...

hello group.. i have a 2002 SS 6 speed, and the oil change light came
on... i want to do the oil change myself and had a few questions...
after im done changing the oil, do i have to reset anything in the
computer to make the light turn off, or does it do it automatically? im

I had no idea where to post this because the are are so many "auto" and
"car" groups on the web, but I will try this one??  My older brother who
is in the army, is giving me his car because he doesn't have time for it
anymore because of his army duties. It is a 1981 Chevy Camaro ...

and does anyone know how to check it to see if it is bad or not?

Just what the title says.  I am in need on a distributor and a 4 bbl
carb.  I have a 327 and I dont need anything too extreme.  If anybody
has one sitting around let me know what you want for it.  As for the
dist, I would like to go with an HEI.

i have got a 91 Camaro 3.1L v6...
About a year ago I had the fuel pump and filter replaced.
Since the car has been a been slow to start and often a little sluggish on
the freeway.

I am needing the dimensions for the bumblebee stripe that was on the
67's.  If anybody has this information, or can point me in the correct
dimension I would be grateful.  If anything I was wondering if somebody
could take a measuring device and measure their stripe.