| Thread | Last Post | Replies |
|
| 1970 Camaro SS worth restoring? | 19 Jun 2004 22:12 GMT | 14 |
Hello all, I have a 70 SS camaro, numbers don't match. Was originally a straight 6. It's been sitting for 20 years without being driven. I have a 454 big block in it, that's never been run. In your opinion is this car worth restoring?
|
| Durable flat black paint recomendations ?? | 19 Jun 2004 18:36 GMT | 3 |
Hi everyone. I am painting my engine compartment of my 67 RS Camaro and am asking for recomendations for a durable hard finish flat black or a super low gloss paint to use on my firewall, inner wheel wells and radiator support. I used this product called Chassis Saver on the
|
| 1989 Camaro Transmission | 19 Jun 2004 06:05 GMT | 1 |
My '89' 4 speed automatic transmission slips when trying to shift from 2nd to drive. The engine is a 2.8 with A/C. Does anyone know what the transmission might be - - like a 700-R4 or something like that. Any ideas on repair cost ver. junk-yard?
|
| Sadly I must sell my 67 convertible:-( | 18 Jun 2004 22:08 GMT | 5 |
The last time I posted here was to get help on restoring my 67 and now I need to know what I might expect if I sell her. Yes it kills me to think of this but I may not have a choice. What I have is a bare bones 1967 convertible with a 6 cylinder and a 4
|
| wtb '68 Outer Right Bumper bracket | 18 Jun 2004 11:04 GMT | 1 |
I am looking for a Right side outer bumper bracket for my Camaro. From what I have seen my 67 has the front clip of a 68. I am not sure what the difference is between the 2, but the bumper bracket that I do have looks like a 68. If you have one or could shed some light on the
|
| Tranmission or rear-end problem? | 17 Jun 2004 03:08 GMT | 1 |
I've got a 68 Convertible that has some problem with the transmission (M20) or rear-end. It makes a clank sound forward, reverse, or neutral. Don't know what happened, it worked fine until a friend took it for a trip to the store; next thing I know, he calls me from the
|
| RPO Codes | 17 Jun 2004 03:03 GMT | 1 |
Can someone learn what RPO options came (originally) on their (or any) f-body car? To clarify, is this information recorded and available on the Internet or from GM?
|
| 94 Camaro - Wont Turn Over, Diesels, Wont Start | 14 Jun 2004 03:34 GMT | 1 |
As I was pulling into my driveway, my 94 Z28 Auto stalled and will not start. No problems until the minute at all. Try to start and it diesels and trys to start but the engien is very rough and putters. Anyone have any thoughts? Timing Chain maybe? Distributor? Please help.
|
| FS: 4 Centerline mags with almost new BFG tires | 14 Jun 2004 01:57 GMT | 9 |
I have a complete set of 4 Ultra Centerline 14 inch mag wheels with 4 235 X 14 BF Goodrich tires, just had them mounted and balanced this week. The tires are like new, they look excellent, have less than 400 miles on them,
|
| 84 Camaro Berlinetta Times | 14 Jun 2004 00:20 GMT | 4 |
Ive got a 84 Camaro Berlinetta 305 and ive looked all over the internet and i cant find any times. im just curious to see what i could be runnin if anyone can help me please let me know what they run
|
| 93 Camero Gas Guage problem | 13 Jun 2004 05:24 GMT | 1 |
My step son has his gas gauge giving him problems. it is stuck at half but will move up when he fills it up with gas. Jow does a persomn get at the sensor for replacing this?
|
| 95 Camaro pass key II won't start | 11 Jun 2004 00:53 GMT | 2 |
My car will not start all the time. There is no turning over, no clicking. I get power to everything else. I just had the started replaced, but they told me that I may need to go to a dealer and have the security system re-booted. I have a pass key II. Any suggestions on ...
|
| radiator support. | 10 Jun 2004 07:44 GMT | 1 |
i have a 1987 camaro with a 350. i just swaped the 350 in the car. the stock v-6 support is not long enought, and i dont want to buy on for a v-8 becouse ithas the radiator hose upport on it and my car is a show car. i have seen camaros with the same swap done that has four
|
| don't know why that happened | 09 Jun 2004 02:25 GMT | 2 |
My reader shows that I posted my sad post 4 times but I didn't try to. Sorry for that. I haven't got a clue why it is there like that. Danny
|
| 1989 2.8 multiport swap | 07 Jun 2004 06:51 GMT | 1 |
im looking to swap my 2.8 multiport, over to a 350 carb. Has anyone done this? Anything will help.Got suspension,cooling and fuel covered. Need help with electrical,seeing as though the e.c.m. will be disconected. thanks.
|