I'm looking for a project camaro from 1974-1977 could consider other years
as well. Ideally the car would be a someones past nice ride which owner has
just let it sit and lost interest or time
pererbaly complete and running but not nessecary no basket cases and no

What happened to this group and all the intelligent posts about the
Camaro? Now, there's just retarded-a.s spam (i.e.: "Asian girls") and
off-topic posts (i.e.: "pics of the 2006 Corvette.") I hate it when good
groups go to sh.t...  

This is going to be one HOT vehicle
You can see the pics at this link
Wonder how much the General is gonna stick it to us for?
http://jlaenterprises.ath.cx/phpbb2/viewforum.php?f=20

73 Camaro, aftmarket dual exhaust...
There is room for improvement on the way my exhaust is hanging right now.  The
previous owner bolted through the floorboard in the rear seat, which is now
tearing holes in it.  And the other spot in the rear is just a bolt stuck into a

matt parker alias erik_von_lindthout@yahoo.com pin down the prick matt
parker http://www.tinyurl.com/4cc39
matt parker alias e vanlinthout@yahoo.com michelle@yahoo.com
matt parker alias erik_vanlindt_herzog@yahoo.com chess lib@yahoo.com

Just got my '68 Camaro back from my engine builder, I had a 383 stroker
built,
w/flat top pistons, dyno'd last week at 347 hp. Right now it has an
Edelbrock carb on it,

Hello. I recently purchased an 1989 Camaro. It needs a little work. I
was wondering if anybody knows of any websites that specialize in 3rd
generation Camaro restorartion. To give you an idea about the
information I need, here are few examples of the things I would like to

Hello everyone. I need some help. I just notice my car is starting to smoke
and there is a lite Black  Liquid  coming from Exhaust tip. Is this a major
problem? (Head Gasket,ETC?

Has anyone chrome plated their wheels?  Like the 2nd gen Z/28 wheels?  My friend
says he knows of a shop where he had his bike done and they can plate anything
steel, and for cheaper than buying new wheels.  Just curious if it's possible,
and might look more original.

ok, just figured i would ask to see what you all would think the problem
would be before i go do anything else....it's a 91 RS 3.1 V6 replaced the
spark plugs, wires, distributer cap and button, now the problem i am having
was going on before i replaced all of that when the car ...

http://www.collectorscarauction.com/item.pl?item=1000398
Collectors Car Auction
http://collectorscarauction.com
FREE AUCTIONS & FREE CLASSIFIEDS FOR ALL TYPES OF CARS

Anyone seen this?:
Turn signal lights both front parking lights, but the backs work normally.  The
indicators on the dash also both flash together.  Flasher?  Or a crossed wire?
This is on a 73.

Pics of madonna caught by the paparatsi giving a bl.wj.b

I have a 96 camaro with the 3.8 v6 and was wondering if there is anyway to
bypass the knock sensor or get rid of it completly so i can install a set
of edelbrock timing gears when i rebuild my engine next month?

--
thank you very much
xxx-ooo
leia