Excellent condition. Comes with tuning kit (rods, springs, jets,
squirter,  etc...) and owners manual. Chokeless but an electric choke is
readily available inexpensively . See the Jegs catalogue for more specs.
Carb is easy to work on, adjust, and fine tune. Very smooth and good

I am installing a 1972  402  motor  ( 854 casting ) in a
1968 camaro 2 door coupe. Will  the 72 BB manifolds fit
in a 68 frame?  RH # 3989310  and  LH # 3989343
Are there any problems with this interchange?

Hi guys .... I picked up a 69 camaro that was never undercoated & is in
very good shape underneath. My question is : after I degrease & wire brush
and sand .... will jack stands be sufficient ( I see that 30 inches seems
to be the max. I will be able to go ) I planned on coating ...

15 yr old son has a summer job and is starting to save for a project car. He
hankers after a Stingray. He should have saved about $3500 by the end of the
summer and I have offered to match it if he does, so looking at $7000.  I
have no experience with Corvettes.  What year should we ...

ok first thing my dad is a mechanic but is 63 and 1500 miles away :(
soooooooo.... heres the problem
it started with the battery dying dad seached the car pulled a few
lightbulbs and then went back home still has that problem 2nd problem my

1. SpeedDemon 750 dp, mech . secs.  Chokeless. Comes with instructional
tuning video.
2. Edelbrock 800 with parts kit .
Both carbs in great shape. Will let go cheapily and give unconditional

Does anyone have experience with scanning diagnostic computer codes
from a Camaro?  Specifically, I am interested in getting a good
quality scanner for reading codes from my 94 Camaro.  I believe the 94
and 95 Camaros both have the OBD I rather than the newer OBD II

I have a 1986 Chevrolet Camaro and it has recently kicked out some of the
accesories power when I crank it up. My power window, the entire
ac/heating unit, engine fan, and fog lights are not getting any power. All
of my fuses are not blown. I did have a Viper Alarm w/ remote start

car was sitting for about 2 months and took a hard time to start up so i
know it still runs and it didnt have good power. and the next time i tried
to start it, it wouldn'ti've changed all the sparks and wires, an ex
mechanic checked to see if i was getting fuel by checking some ...

Anyone recall the posting from a few months ago regarding using tires that
are several years old but never (or hardly) used? The consensus seemed to be
that even if tires are in pristine condition, if they are more than a few
years old

Hello ..... Any advice on what I would expect to pay on a very good paint
job ( for a 69 camaro .... I plan on keeping it Cortez silver ) Complete
car body, needs prepped & painted. Extremely minimal body work ... going
for the enamel / clear coat. I am not looking for the ...

Hello,  I purchased a 69 camaro SS and have been doing some work on it. I
am currently in the market for tires now & wanted to get something that
would look good in the rear. ( Nice stance, not too big ) .... I currently
have 205 / 70 14's all the way around. I planned on keeping ...

i have a 94 camaro. turnsignal light up but will not flash. emergency
flashers work. I checked and they only show one flasher at the parts
store.

Model 1412 high perf. street Carb . See Jegs latest catalogue ; page
78. Also have a package of base gaskets too. Comes with the #1480
Calibration Kit with all pieces plus some extras. Owners/Instructional
manual incl.   Carb has approx. 3,000 miles on it over 2 summers. Carb

Do any of you have any experience with GearVendors overdrive (mated to a
3-speed Auto) in a 68?  I'm thinking about going the overdrive route and
like the idea of keeping the TH350 workhorse.  I know it is expensive but
maybe its worth it.  Any experience out there?