How can I find out wether my 1983 Camary Z28 has
a limited slip differential or not?
Placing the car on jackstands and turn one of the
wheels and looking what the other wheel does?

I have a 1985 Z-28 5.0L TPI.  I was wondering if the catalytic
converter contributes any significant exhaust noise reduction.  I
recently replaced both the original catalytic converter and the
muffler on my car.  I noticed that the exhaust noise is noticeably

My nephew is restoring a "82 Camaro Z28 Indy 500 car. He is looking for
a restoration book. He thinks it is called  Nuts & Bolts  and that you
can get it for specific cars. Does anyone know where we could find such
a manual? Thanks for any help.

I have numerous auto repair manuals for sale. All are in great condition and
some are mint and in wrapper. All are complete and look as new. Many are
original prints and some are huge.  Take a look and e-mail me for the price
of the book you need or if you have any questions.

Hey, I'm new here if that isn't already painfully obvious. I'm also
pretty new to car mod and cars in general, which is funny since I'm a
tracked vehicle mechanic in the Army (that has yet to touch a tracked
vehicle; thank Korea for that).

A day or so ago got into the car, shifted to reverse, it took a minute then it finally dropped into gear, it dropped very hard. Now the car wont shift into reverse at all. Rest of the gears are fine but no reverse. Does anyone have any ideas? I checked the fluid, the level was ...

ok here we go it has 40 to 50 lbs fuel pressure,strong blue spark to the
plugs,a new crank shaft position sensor,and now it wont fire at all.I
would think that it must have jumped time but when this first started it
would run fine untill it was warmed up,could this be the cam pos ...

I HAVE A 1994 CAMARO 5.7 LT1, IT OVERHEATS CONSTANTLY, I HAVE REPLACE THE
HEADS ON A PREVIOUS ENGINE TWICE. SO I DECIDE TO SWAP ENGINES WITH A 1995
CHEVY IMPALA 5.7L LT1
IT DID THE SAME THING AGAIN. DOES ANYONE HAS ANY IDEAL WHAT CAN IT BE. I

i've just put in a new 454 (rebuilt) in my boat. it came out of a nova.
i changed the came to a 112 lobe center and put it in the boat. it ran
great. then started to sputter. i pulled the intake to find a bent a
rod. before that though the lifter fell off of te #4 Cylinder (intake

I really need some help in knowing if it is at all possible for aomeone like
myself to replace spark plug wire #4 in a 96' Camaro V6?
I have a misfire in cylinder number 4 and I am sure it is the plug wire.
However it looks like it is going to be quite costly to get any mechanic ...

Hope someone can tell me what is a resonable charge for changing spark plugs
and for replacing spark plug wires in a 96' V6 Camaro?
This is assuming I am supplying the plug and the wires.
Thanks in advance for all contributions.

Hey guys..need to pick someones brain.. My 85 camaro (2.8L) was running
fine..I then put it up on some ramps, and it shut off...then when i tried to
start it it flooded..so I let it set for a couple hours to let the plugs dry
off.. When i went to start it after that i found that ...

So here's the story...  My wife inherited said Camaro following the
death of her father.  This car has been sitting in a garage for the
past few years.  Over the last couple of months, it has been serviced,
fluids replaced, and is driving.