I have come into a 73 Chevy C20 with a points distirbutor and I just
baught an HEI distributor and I dont know how to hook up the wiring
for it, does any one know how to hook up the wires or have a diagram
or instructions that will help me?

I'm about to buy a 96 firebird 5.7 LT-1. I test drove it today, but it felt
kind of rough when in idle, but as soon as I steped on the gas, that thing
would spin tires. Is this a normal vibration with big motors? The oil
pressure would be at a quarter when idling, then half way or a ...

What kind of tire life are you guys getting running 17" rims? Is it
dramatically worse than the 16" rims? Also, any advice on where to get
decent 17" rims at a reasonable price? Car is a '95 Z28

Hope someone can help me out here. I have stock tires on stock rims and the
tire size is 245x50 16.
My question is, am I able to put tires that are 245x60x15 on the current
rims or do I have to get diffrent size rims.

I'm having trouble getting the back up lights to work in my '80
camaro Z-28. Theres a diagram for them at http://www.nastyz28.com/camaro/wire/78w-rear.jpg
. I dont know if it's a fuse or not but I'm pretty sure theres nothing
connected to the back up switch, but I'm not sure which ...

Hello:)  Im trying to remove the complete rear seat of my 1974 camaro
and am having no luck.  Anyone have any ideas?  Thanks :)

I have 88 Camaro (V8) and when I got the car, brake light and hazards
don't work. the tail lights and blinkers work properly.  I'm more
concerned with the brake lights than anything else.  I checked fuses,
replaced bulbs, and replaced the brake switch, but still no luck. So i

Hi -  I am changing out my Z's fuel pump because near as I can tell it
is bad, it would supply my Quadrajet with no gas at all. When I pulled
the old pump off the push road dropped all the way down and I do not
know how to raise it again to get the pump finger back underneath it.