I think it's time to replace some of the suspension bushings on my '75.
Sway bar bushings look old and cracked.  I read where a set of newly
installed poly. bushings was removed and replaced with rubber bushings
because the new ride characteristics didn't please the owner.  It could ...

i put a new windshield in my C-4 and it has gotten water spots on it,
stuff is tuff to get off, any ideas? Greg
yes i know it is a stupid question, but stoners and windex sure as
hell is not working.

The other night I went to roll my headlights over before shutting of the car
and the driver's side light seemed hung up...I got out to investigate and
found the 'flat' panel that is visible when the headlight is stowed had come
off and was keeping the headlight from rolling over.

Hi all, I need some help.
What does it mean when both turn signal indicators along with the high beam
headlight indicator stay lit on the instrument panel?
I have checked all of the exterior lighs and they appear to be operating

I have a 1990 Corvette with the 350 and auto trans.
First a problem that has been a pain is at times the idle will stick.
Sometimes at 1300 rpms and others at over 2000 rpms. Going down the
road I don't even have to touch the gas to maintain 60 mph. I have

What years (not including '63) was the Z06 available?  Was an automatic
trans an option on these?

The new plugs are about .060 out of the box.
That's a lot to close to get .035, and the electrode
is angled...so it's only .035 at the closest point.
Has anyone come up with a gadget that will

OUCH!
http://www.ananova.com/news/story/sm_76570.html

I believe it was Wayne Johnson who first shared San Diego's penchant
for high speed tailgating on North County's I-15.  This adds a shaggy
verse to the story.  For Dave, this illustrates that it's really safer to
tailgate than to allow for a reasonable stopping distance.  TIC

I would like to purchase a cover for my ' 98 Vette, but have no idea what to
look for.  Although it is garaged at home, it sits out in the parking lot at
work.  I live in Dallas so the sun can be brutal during the summer.  Should
I plan on covering it all the time while at work - ...

       slightly off topic but we'll probably see this in the vette
       catalogues soon, amongst all other stuff... :-).
       has anyone bought the pc corvette game and is it any good?
       http://www.corvettegame.com/

I just picked up a new, 1999 burgon red corvette coupe (33000 miles) today
from the dealership. Im just so excited and happy.
It's a sweet ride :) :)
regards

My mechanic said he could drill and tap in some zerk fittings ;  ive
heard one or two cases where rear bearings have siezed up on C3 vettes.
Do u think its a good idea to have grease fittings added ???

I bought my 1985 C4 two years ago and ran 10W-40 in it for several
thousand miles before noticing the bold print in the owner's handbook
warning NOT to use 10W-40. Did I do any damage?
Thanks,

03 Z06,   KBB says $43K retail and only $38K to a dealer.  God,  I hate to
give it to a dealer.  But sitting home waiting for a tire kicker - ugh!  And
please,  don't say "e-bay".  I have yet to master that place.