I live in a small Ukrainian town. My husband-Armenian had leaved me
when I already was pregnant. I am a yard man. My salary is about $50
per month. My daughter grew up as a very nice girl in spite of our
destitution. When she was sixteen my daughter went on the lake near

This morning's S.D. Union has a '99 w/137K miles @ $ 20K obo.  
More miles than I'd like but the market is finally loosening up.
Regards, "Mike"
-- mikeellison3xxxatzzzyahoo.com --

Will glass T-Tops from a 1977 fit on a 1974 with fiberglass t-tops with out
any alterations? Thanks in advance!
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!

I am going to try to rebuild my Edelbrock Performer carb on my 76 this
weekend.  Any quick suggesions on how to make it easier?  I have the rebuild
kit fron Edelbrock, some carb cleaner and plan to document the whole
process.

As I continue the first phase of restoring my '79 I have decided that my
carburetor is likely in need of some new life.  The car has been stored for
years without being driven.  Considering it was stored with a nearly empty
fuel tank, I seriously doubt the fuel was treated for ...

I just purchased my first corvette. It has been hit on the driver side front
bumper. The frame rail has been bent in front of the front tire (about 5" to
the center of the car), and I am getting conflicting repair strategies. One
shop says cut the rail and weld in a new piece, ...

Last night I changed the plugs on my C3.  This morning I am on my back under
the car staring at the plug wires and thinking "oh no."
It looks like the front 4 are protected behind a heat shield.  To make
things worse, it looks like the starter needs to come off to get the shield

What's the symptoms of trailing arm failure.  Had this 75 for many years,
but not sure what the status is or should be under there.  I know what can
happen if they fail, but are there any drive sounds/vibrations that predict
failuer?

Here's a great gift for Dad.
A Direct-Track Mobile Locating Unit from www.DirectTrackProtection.com 
As a father I can tell you that the most frustration part of being Dad is not knowing where your children are and if they are safe.  I am not talking about the little ones off ...

Whoops...sorry.
I need a 1967 Corvette Turn Signal Switch.  The 67-68 models had
a unique turn signal swith that is not being manufactured.
Also, is there any way to wire around the switch?

Hey Guys
I've been noticing that when I am rounding corners(on/off ramps) at speed
and if there is a bump in the road my '93 seems to have a noticable shake
in the steering wheel. It's a side to side shudder in the wheel. If you

Can someone please tell me the easiest way to replace the oil guage pressure
tube?  The existing tube has a leak about midway, under the dash.
thanks much

Yep!!  There it was at the bottom of the differential case...the ever
suspicious retainer ring it is torked like it has some serious pressure
applied to it and then there is just a bit of a gouge to the face of it.
My guess is someone hit a big something in the road, bent the strut. ...

   After writing this I should say that this is long and I am not asking
any questions. I am just sharing a positive Vette experience from a guy that
is boiling over with Corvette enthuziasim<----spellcheck?.
     Took my new 1977 Vette in today to get it's first "check up" (by ...

 I have been looking up serial numbers via google and doing research into
my newly purchased 1977 Vette.
 Did more Google research and found the meanings to a pile of numbers and
now have half an