The dealers here are really dealing on Z4's and Corvette's.
Corvette's are 9,000+ off list. Drove really nice during its test drive
today
Z4 has a dealer incentive of 3500 plus 1.9% financing. It drove really nice

Shifting into drive is no problem and car seems to want to take off right
away,  but
when shifting into reverse, it takes a while (about 2-3 seconds) before
moving, is this

Did I read this right ?
Gordon Brown plans to make a 134p (no pound symbol on my US keyboard) per
mile surcharge, for drivers - introduced over the next 10-15 years ?
I guess at 12,000 miles per year I'd have to pay $30,000 - I'm guessing

please help disabled guy
http://community.webtv.net/timcoe/thingsthatarecool
http://community.webtv.net/timcoe/doc0

I recently bought a new 2004 C5.  After driving the car for about a month, I
decided I wanted to change the radio (it has a cassette player in the dash
unit and the 12-disc player in the back).  I called the dealership and was
told that I couldn't change the unit that was installed. ...

Today I put 2004 pressure sensors in my rims that I was running on the 98
that I had so I could put the rims on my 2004.
I now have a set of 4 Corvette pressure sensors GM number 10438853 that I no
longer need. They all work but they are the original 1998 sensors.

I dont remember it being that high when i first got it . Its a 2000
covertable.
I have never really paid much attention to it . But all of sudden it
just seems funny ? I think it was that high before i would have

I just bought a 1980 Vette.  Two questions:
   1.    The steering wheel center cap/horn assembly is not all there.
Does anyone have a good exploded view of the assembly/a hand drawn picture
so I can get the parts and assemble it so that the horn works?  I have a

Washington DC (dirty crooks), collected $2,300,000 in photo enforcement
finds for the month of April setting a record of revenue enhancement.
Will this slow up the tourist trade this year??  It should.

Has anyone used this product? Is it any good? What is in it? Thanks!

I'm thinking about putting the one inch wider Z06 wheels on, and possibly
even going up an inch in wheel diameter over my stock 04 Coupe run flats.
But I do like the tire pressure information.
Anybody know if the stock pressure monitors will work if I go up an inch in

OK, I am going to replace all Suspension bushings in my 78 and want to know
the pros and cons of Rubber VS Poly. I am not sure I want to end up with a
car with a much harsher ride, just want a pleasure cruiser and not a race
car.

Well here I go and have some fun!   What would you do if you can opt for a
gear drive or chain drive for a 1990 Corvette.   First I can hear engine
knocks so the knock sensor could be adjusted for gear vibration second I
tend to run higher octane fuels anyway's. The thought of ...

I got an 87'vette convertible and i would describe the suspension as
loose. I was thinking of changing the bushings from the stock rubber
to polyurithane. How hard is this to do myself. What other suspension
upgrades are good. shocks?Swaybars? etc...

So I have this car in my garage, which I have had for 5 1/2 years. When I
first got it I did a few minor things to it. Many days, over the past few
years, I go out in the garage to get something and I see that '74 Coupe
sitting there and say why dont I sell that car.. Then every ...