| Thread | Last Post | Replies |
|
| custom luggage for Vettes? | 31 Aug 2004 22:50 GMT | 6 |
Just wondering if anyone makes custom luggage bags for Corvettes. After looking at `04 Vettes recently for the first time (coupes and verts), seems that cargo space is tight. For coupes, you need to be able to store the roof top (which might be wet or dirty) in the cargo area, ...
|
| Spark Plugs for 89 | 31 Aug 2004 21:00 GMT | 15 |
I'll be changing my spark plugs soon. I was just wondering if any of you used other brands other than the GM brand. Results? Thanks Dan
|
| 2005 C6 coupe prices | 31 Aug 2004 20:47 GMT | 15 |
Kerbeck Chevy in New Jersey lists the coupe for $44245 http://www.kerbeck.com/2005_corvette_coupeprice.html
|
| C4 - ceramic pads for street driving? | 31 Aug 2004 16:14 GMT | 1 |
Do these really work to limit the dust build up around the rims? Reduce noise? Eckler's has cheap sets of semi-metallics for $25 per axle. Are these a good deal?
|
| Wheels for 86 vs 96 ZR1 | 31 Aug 2004 15:40 GMT | 12 |
The wheels on my 86 are 16 inch and tires are 255 50. If I bought the 17 inch ZR1 wheels, what size tires would I need to keep the speedometer accurate? And will these ZR1 wheels even work on the 86 model without rubbing the body or frame?
|
| C3 Convertible Cross Country: Security? | 31 Aug 2004 13:40 GMT | 7 |
Within the next few months I'll begin restoring my '71 ragtop. Eventually, I'd like to take it cross country. However, I've been wondering about security issues: have any of you had problems during long cruises? How do you keep you valuables secure?
|
| C5 Questions | 31 Aug 2004 09:10 GMT | 13 |
I droppped my C6 spot and purchased a C5 built on 6/21. I've put the Corsa Indy Pace Tigersharks on it, so far. Coupe. I'd like to increase the horsepower to the C6 numbers, and I am told this can be done with a Nightwing, or other front air induction change with K&N
|
| 2000 C5, 50k miles, 6-spd, transmission noise | 31 Aug 2004 01:36 GMT | 2 |
Hi, Folks. First time vette owner (since Friday). I am in the curious situation of owning both a 280ZX Turbo and a C5 6-spd Vette. You may know that the Z has a BW T5 in it, whereas my "blue car" has a T56. That is to say I am accustomed to some transmission noise. In the Z, I
|
| 1st to 4th shift light? | 31 Aug 2004 01:30 GMT | 11 |
I just read about a "1st to 4th" shift light on the new Corvettes. It says that when the light comes on, you must shift from 1st to 4th, then you can downshift after that if you prefer. What's the deal with this? Is there a way to disable it? The reason I order a manual ...
|
| C3 Aftermarket Air Questions | 30 Aug 2004 22:11 GMT | 3 |
In preparation for the restoral of my '71 ragtop. I've been considering installation of after-market air. I have a few questions I hope you guys can answer for me: 1. I've heard that Hot Rod Air has a good kit. Are any other
|
| Question about pads and rotors on ebay | 30 Aug 2004 21:29 GMT | 5 |
Reposting as people probably thought this was an add based on original subject line: Does anybody have any recommendations or comments to make rotor/pad deals on ebay?
|
| 1999 C5 Targa Top Rattles | 30 Aug 2004 19:53 GMT | 2 |
Any ideas how to adjust the removable hardtop on my C5? It rattles and squeaks over the slightest bumps.
|
| Overheating problem | 30 Aug 2004 16:40 GMT | 30 |
I was hoping someone might have an answer for me. I have a 94 coupe with 66k miles. It runs just fine on the open road, but gets pretty hot while standing still or in traffic. The water pump was changed recently and the radiator fluid is pretty clean. What do I do?
|
| Engine rebuild | 30 Aug 2004 04:52 GMT | 3 |
Hey.........anyone know what the money should be to rebuild my 350 and the trans also. All stock. I think I would like to shop around and just curious what the money should be. I live in a small town and sometimes I think the prices for some of
|
| Hypertech's Power Programmer III on 98 C5 LS1 6 Spd. Any words of wisdom? | 29 Aug 2004 14:14 GMT | 4 |
I have done a few small changes on my 98 C5 LS1 6 spd Corvette and am going to try out what effect the Hypertech Power Programmer III has on the car as I have had a number of comments this would help out the power/torque curves a fair amount since the intake and exhaust have been ...
|