I am trying to remove the differential cover from my 1969.  I have removed
all the bolts from the outer edge of the cover, and it seems almost
impossible to access the two in the top of the rear crossmember.  I have
remove the two from the ends of the crossmember.  Should the ...

I have a 1993 LT1 Corvette that had a message blinking on the speedometer
for about 1 month, now the car will not start.  I have checked the Fuel
injectors, EGR and MAP sensor.  Any clues???  Thanks

Guys,
I am having a strange problem with my 92 Vette LT1.
For some reason when the car is cold, CD's will not eject or play (display
goes blank or sometimes shows and ERR condition).  When the car heats up to

Ok guys, help me out, i posted last week bout the engine stutter, and since
ive replaced wires and plugs, the last thing is the fuel delivery. I went to
my local advance auto bought a new fuel filter for a whoppin $1.99 (steep i
know hehehe) anyways, i cant find the damn canister ...

Just brought home a basket case 62, need a good source for parts to restore.
I'm located in Texas, all ideas will be appreciated.  Please answer here or
at johnbum@hotmail.com Thanks

Had a little fun last night with a CTS-V.  I must say I was very impressed.
I think they come with LS2 motor the guy said it was 400 HP.  It's a good
thing I had my "Big" car with me because I think it would have spanked a C5
without a blower.

What is up with the GM styling and design team. Ford and Chrysler are
pulling away. I am a GM junkie but I find myself always looking back
at the "good ole days" instead of the present. Other than the Corvette
the Chevy line up is weak. It seems as though the bean counters have

My '98 C5 needs an alignment. Can I go anywhere for this or should I take it
to the dealer? Will I need to balance the tires as well?

The local Ford dealer got a GT (40) in with a price tag of  $151,000 and
change. Looks even tougher that the original did, blown with rollers for
tires. Dealer claims that the present HP is 550 and not 500 as it started
out in life.  He also said the Company was going to build 8 ...

I have been looking all over the web for my College dream car a 1987 Blue
Corvette roadster with Blue interior. Found one here in Florida but it had a
black interior and one in SC but had all kinds of aftermarket junk on it. I
will travel to pick up the right car at the right ...

Found mouse droppings in my '75 model, so put a mouse trap on the drivers
floormat.  Caught a mouse.  Reset the trap, and caught a second mouse.
Found a large mouse nest under the console by the temp. controls made of
chewed up carpet insulation.  I figured they were getting in ...

I just purchased a set of 15x8 rallys for my '65 vette. I was told by the
manufacturer they would fit. The front fits, but the rear ones are hitting
on the inside. Has anyone else had this problem? What is the remedy? Should
I try spacers?

http://www.jlaforums.com/viewtopic.php?t=10515
'It's Peter Max's Car, Man!
How one artist’s big PR dream left 36 Corvettes in the dust in
Brooklyn basement.

You have probably seen several posts on here about JLA Enterprises forums.
I decided to check on one of the pictures he was posting.  I found it an
interesting surprise and you might, too.  Go to
http://www.jlaforums.com/viewforum.php?f=20

got an '84 and once again it has a cracked leaking plastic radiator tank (2
time in 5 yrs) anyone else have this problem?
is there a suitable all metal radiator replacement that will have a longer
service life?  Thanks for the help.