Can anyone tell me how complicated it will be to fix the my drivers side
mirror on my 97 C5?  The mirror assembly is now loose and will not lock into
position, and will freely rotate.  It was not bumped or bent back as far as
I know, I simply noticed it out of adjustment, then ...

Took my 84 down to the local mechanic and he told me 225 with AC on is
normal for my vette. I would think if I bought the car brand new in 84' it
would not be running anywhere near 225 but would be locked in at 190 like
all new cars. I have replaced the stock radiator with a new ...

What do you think the future holds for the classics in value and demand
when gas tops $3, $4 or $5 per gallon? If we are indeed near or past the
peak oil and are headed in another fuel direction in the next 15,20,
plus years, will a majority of these cars drop substantially in ...

Group:
I need your recommendation, I have to replace my tires on my 74, the rims
are 15".
The current rear tires 255-60r-15

Well every thing has worked out very good with the 1980 we have in the
shop for repairs ( turns out to be more like restoration and
modification) the man that owns it came to pay his bill yesterday and
was impressed and decided to leave it for another round of work, here

is there a certain order to bleeding the brakes on a c3 (1980) we have
one in the shop here I am pretty sure that we have got a bad master
cylinder, we have bled the brakes with a pressure bleeder starting
with the farthest from the master cylinder first, working our way back

My brake holds on small hills, but not as well as I would like.  My 67 and
74 Vettes held ok facing up a hill, but not down.  I took it in to Chevy and
they said the brakes had to be disassembled and it could be Parking Brake
shoes - possibly a rotor.  They estimated $1,000 - I ...

I posted this question a while back and got no response, thought I'd try
again. I went into Eckler's site to check for 'glass repair materials for my
'78. According to the site, their materials work only up to '72 because
after that SMC was used. I thought that SMC wasn't used until ...

I've been having issues removing the rear rotors on a 77.  I'm not sure if
they are just very rusted on or if there is a step I'm missing.  Any help
would be greatly appreciated.
Thanks.

just recently finished repainting my 71 coupe with the 2002 corvette electro
blue. It looks great and the painter did a really nice job.
The problem that has come up, is that on the hood, just above the air
breather area, the paint has air pockets.  The guy who painted it, took ...

Damn took care of most of the TLC that this 98 needed and was on my way to
the dealer to
get the recalls taken care of (Lap belt, Column lock) and the check engine
light comes on so I have

Help!! My 1988 Corvette (19,000miles) stalled about a mile from home on a
gorgeous sunny afternoon (top down).  I couldn't get it started and called
for the "hook".  Forty-five minutes later the wrecker shows up and I attempt
to start it again.  Fires right up, but dies after a ...

Pics at this lin
http://www.jlaforums.com/viewtopic.php?t=23083
Very nice!!  A black and Silver on

I have a '73 350 w/ Auto Trans.  Tonight while driving along, the car cut
off, the headlights went off - no power at all.  I coasted for a ways so I
could get out of the way - after about 30 seconds - power restored and the
car cranked and ran fine.  I was running AC, radio and ...

i have 1969 monza red vette that got yellow paint line painting from the
road need to know how to get the yellow paint off the car with out
hurting the red paint.