http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=...
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=...
BOTH ORIGINAL GM MUSCLECAR ERA AUTOMATIC SHIFTERS

Apparently the new punk pastime around here is goughing this underside of
side mirrors.
Both sides have gashes under them and no, it's not from doors.
I have not parked where anyone could park next to me, but even if they

Has anyone replaced the rear hatch glass in a 94 corvette, Or can you tell
me all the diffrent year models that will fit. details will help
Thanks

I am looking for the best (but reasonable) Paint and light repair shop
in Dallas North to southern OK. Need to refinish a '63.
Names with phone numbers appreciated!
thanks!

ok guys..maybe a dumb question..i just installed new heater hoses on my
79..the bottom side of the heater core is a 5/8 hose..the top is a 3/4
hose..i had them routed core to core..and wtaer pump to intake ove the
summer to cut back on the heat during the summer months here in ...

We are happy to announce that Championship Auto Shows, Inc. has
purchased the Chevy Vettefest shows that take place in Chicago at the
McCormick Place.
These shows were established by Mid America Promotions' Ken Hanna and

I know you are vette guys but maybe you can help me.
I about to put a corvette C4 IRS on my 90 Iroc.
I heard about some guys that have done it already but couldn't find
information and/or pics of this swap.

I have a 2005 Le Mans Blue C6 beautiful car, the other day I noticed a
few surface scratches so I break out the old rubbing
compound.....(never do this) well needless to say it looks kinds bad,
it's really hard to describe, anyone have any suggestions on how to

I looked at a 67 convertible this weekend. I am trying to determine what
is a fair price to offer. Here are the details:
1) NEW PAINT (EXCELLENT)
2) INTERIOR     (GOOD)

Thats what she calls herself check out her page...
http://www.c54u2nv.vettepics.com/

What does LS1 stand for???

Selling a '72 vette convertible in need or restoration.
Have pictures for review.  Send email to:
mpompura@cfl.rr.com
Condition:

Within a 4 week period, I have had two mirror assemblies break on my 97
coupe.  The problem seems to be with the spring detent that allows the
mirror assembly to pivot if struck.   First, on the drivers side, and 4
weeks later, the passenger side.  In both occasions, there was no ...

i have a 74 corvette and am wondering what can be done about the tremendous
amount of heat that comes up from the floorboards and thru the firewall?

Hi group:
 I have an 89 L98 conv. I am having a problem with it, first thing in
the morning it will start, rev up to about 12-1500 rpm and then idle
down and die.  It will not restart after this unless let sit for 5 or