Have a 2000 C5 and I have been receiving an intermittent check engine
light for a few days now. Went to Autozone where they did a error code
diagnostic and found out it was P0401 - Secondary Air Injection System
Malfunction. Anybody know how serious this is? Is this something I ...

Does anyone know if it is possible to build a complete 50's or 60's
corvette clone from after-market parts? It seems like most every part
for the cars is available through some channel or the other. I would
like to build one that has a more modern drive train, body

I have an '80 with the 350.  I can't seem to get the oil pan drain plug to
completely seal so that it doesn't leak.
I've tried 3 different replacement plugs from different manufacturers.  I've
cleaned the mating surfaces.

Had something strange happen to me today I was pulling out from a parking
space and my car just shut off and the DIC said "Pull out key wait 10
Seconds" what the hell is this about???
98 C5

Ok ya all I have a real problem... during the last few months I have had a
no start condition.  I am not talking about the engine cranks but no start,
but rather I turn the key and nothing.  I have all lights all power but no
engine turnover. I don't even have a clicking from the ...

I've been driving an 89 C4 A4 for over a decade now as a daily driver.
Gearing up for a used C6 2005 A4 purchase soon.
Either a F55 or Z51 suspension.
Were basically talking a 20 leap in technology.

I have heard for some time that the SMART car (75mpg) is coming to the
US.  Then last week I heard that a dealer in Portland has started a
waiting list for the cars.
Anybody have any more information???

Any of you guys worried with the state of GM ? Where will they be in 5 yrs?

Back when i was running 11-1 compression ,  I sometimes went to my local
airport that would sell thier 100 octane gas for high perf. cars and
boats.  It made a difference .  I dont need to do that anymore since the
motor was rebuilt to 9.6 cr ...but, i was wondering if any of  you ...

I hate to admit it, but I have a 1980 Corvette 350 Automatic, that has not
left the driveway (yeah i know not even garaged) for 4 years.  What should
I do prior to trying to start it? Last time I started it was a little over
a year ago. I also know the brakes have issues since the ...

Has anybody installed the richmond 6sp in there vette. I am thinkin
about using it in my 72. There is a M22 in ther now
--
Ric

1) I am going to replace my clutch with a basic stock type kit. I've looked
at Ecklers, Zip, etc. and they all are comprable in price and none list the
manufacturer of the parts. My local parts supplier offered me a Borg -Warner
kit for approx. $40 less and no shipping. How can I ...

I was just surfing the web and came across the attached abomination.
Everyone is entitled to their own opinion, however, IMHO, this car would
rank amongst the most gawd-awful and overpriced cars I have ever seen.
http://www.sylmar ...

'75 model.  My manual doesn't give instructions or vacuum values for
troubleshooting a sluggish headlight system.  Right light is sluggish when
it works and the left light needs human assist for any up/down movement.  It
does say that defective vacuum actuators can be removed thru ...

I could look up the answer to this, but, i thought it would be fun to
see if everyone is in agreement to the two following questions regarding
Rules of the Road :
1. (Im not 100 percent sure of this )---  When in a school zone and the