I have a 1969 vette. The dash is cracked and I want to replace it. Does
anyone know where I can purchase a used dashboard? Or does anyone know
where I can purchase a new dash for less than what's shown in Ecklers?
And is the dash difficult to remove and replace for someone who has

I was jump starting my 84 vette and the hood closed shut. The hood latch was already broken. I had rigged it by running a wire from the engine compartment to open it. Anyway, is there a way that I can open it without taking it to a shop
--
fgarcia

I have the 57 Bel Air with a Corvette Fuel injection on EBay.
I want to be sure of the B.O.D. of the injector so I can state it on
the site.
No. 7017300

After swapping a working intrument cluster into my fathers C4, it still
doesn't shine bright. Checked the fuses, all good. Does anyone know what to
check next? I was thinking the headlight/dimmer switch? The dimmer does work
with other dash lights though...

Well,
I sold my 1980 C3 to my son-in-law.
It was my first Corvette. I had driven sports cars for years, but never
owned a 'vette until I was 42 years old. I was driving my '84 300Z turbo, 5

have a look in the link in my sig _____________________
Unlock phones
music
soccer tv

The Vette pace car for 2006 Daytona 500 will have  higher HP than the 43
cars running. What a joke restictor plates are. I hope Jay Leno Laps the
field!

Video is here:
http://www.carforums.net/showthread.php?t=11785
Dyno sheet is here:
http://www.carforums.net/showthread.php?t=11781

I reported in earlier posts that my belts on my '98 C5 were squeaking. I
took it to a friend's shop and he found that the rubber in the harmonic
balancer is all worn and wobbling. He said the belts are old and dry too.
The job is going to cost $679 total, new belts and all. He said ...

Was wondering if anyone here had any tried and proved modification
ideas/advice starting at the low end and working up for both a 01'
Z06 and 02' Z06 Corvettes.
Not sure if there would be difference between the two (since there

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8029510871&
sspagename=STRK%3AMESE%3AIT
rare one-year only "spherized wedge" cast iron Pontiac D-port heads,
casting #061
will fit 350-389-400-421-428-455 Pontiac engines

(Delurking)
Was out on the road at Xmas & picked up either a cracked R/R wheel - or  
just chrome surface crack. Dealer says wheel serial #'s tie to the VIN &  
the current wheels were on the vehicle, when it left the factory. BUT the  

I've been done wrong by 1SourceAutoWarranty.comon every single claim I made.
They owe me substancial $$$. I now hear rumor that they are gong out of
business. I wanted to file a class action suit after my warranty expired. I
have been contacted by at least 12 people who wish to do ...

Can anyone tell me how to program the key faub
dkj
73,05