Hey all,
What is involved in serviceing the traction control on a 2000 coupe 6 speed?
I took a corner a little fast today but stayed in control and as i was
exiting the corner

I presently own 3 vettes (2001 6 spd-mine, 1999 auto-hers, 1966 big
block red/red roaster-definitely mine).  I'm selling the 66 and
starting a 64 Grand Sport project.  I already have the 64-donor car
however, I'm having a hard time locating the various body parts ie:

Hi I'm an italian vette lover, I'm buying my first corvette, I like classic
cars so my choice now is a C3
Obiouvsly I like most the C1 and C2 but now I can effort a C3.
My question is: What I've to watch to buy a 99% original 1975-1977 C3?

Do I need to unplug or disconnect my float charger if I start my C4 over the
winter or can I leave everything hooked up while it runs? I like to get the
fluids circulating every month or so. Thanks.

I'm hoping someone can help me and recognize what has failed on my 1999
Corvette.
No problems previously. I've had it parked in the garage for about a
week. When I went to start it the battery was dead. I plugged in a

I have a C5 put up for the winter.  Any idea what interval the battery needs
a recharge?  How long can I go before the security system, clock, etc. runs
the battery dangerously low?
Mike

My '98 C5 center console lid has a rip in it. The only replacement I like
other than OEM is the one in the MidAmerica catalog. But this is for a 2005
C6. How different are they?
BTW anyone know where to get an OEM looking replacement.

Surprised to see one for sale at $85k...only $20k over list!

Where would I get a diagram of the 1980 C3 engine ?
Or maybe one of those blown up diagrams showing where everything fits.
Well, Mainly I'm trying to educate my self about the engine and how it
is laid out, before I start opening stuff up...

Just bought a powder coated plenum. Supposed to have been off a 89. But it
is not. I have removed EGR and smog pump from my 89. The plenum and TB are
diffrent. Is the extra triangular shaped hole between the TB and plenum used
for EGR? If not what is its purpose? Or is it part of ...

I have a 82 Collector Editor with very low miles and the calipers are
leaking.  Everything about the car is original.  The question is, do I have
my calipers rebuilt?  Or do I purchase rebuilt ones and exchange mine?  Or
purchase new AC-Delcos?  Would I devalue the car having new ...

I am currently working on repairing and restoring the engine of my
project 1980 Corvette.
then I will replace whatever needs to be improved in the interiors and
dash.

I put a pair of them from my C5 up on eBay
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8024888584&
sspagename=STRK%3AMESE%3AIT
with a starting bid of $50 for two of them.  To my surprise, no one's
interested.  These have 4/32" of tread left.

What a beautiful day to start a new year out with, took the Corvette
out and warmed it up good, was a bit hard to accelerate at over 100 in
4th. Wanted to get a little loose on the cold pavement. Had to wash
some road grim off but was still worth it to get it out again, 3 weeks

I own a 1995 Corvette. It has 6,000 miles on it.  I had to replace the
original equipment battery this summer.  After I put the replacement
battery in I did not try to start it for about a month. When I did finally
try to start it the new battery was completely drained.  After ...