I live in Los Gatos, have a 1980 corvette and would like to find a
really good mechanic who knows a lot about this particular model and can
help me maintain and improve it. Any recommendations would be greatly
appreciated.

Has anybody out there had to get a  new key for sixties glovebox?  I
would like to have the original style that came with the car.  Thanks

I know all about owning and driving corvettes.  I take my 96 out
whenever I can.  Also looking at a 99.
Anyway, I have an  opportunity to pick up a 90 ZR1 in the mid 30's.  I
do not know much about the zr1's.  I have a 96 lt4 and have read that

I was looking for the price guides on classic Corvettes and having some
problems finding them.  NADA and Edmunds both have theirs, but I'm not
finding others.
Didn't Corvette Fever have one?

I have a friend that has a 2003 vette and is having trouble with trying to
get the noise problem taken care of. Can anyone help us here? Or has anyone
else ever had this same problem?
Thanks

If you plan to convert your optispark.. I have the coil setup ..these coils
+ module sell for several hundred dollars....for use with the DELTEQ
system..save $$$$..See my ebay item # 8045699454..All four Coils are NEW
never fired up ..module is perfect. Module is from a Cadillac ...

This is just a reality check for myself on the costs and time to build
a Corvette Kit car. My thoughts fall in line with the absolute out of
reach costs of buying a genuine classic late 50s Corvette versus
building a late 50s style Kit Corvette. I also want to have the

Anyone have a crack for Paintshop proX?
Thanks in advance

I need the front bearing retainer for my Borg Warner 4spd. It is the part on
the front of the trans. that the throw-out  bearing rides on. Zip, Corv.
Central, Ecker, etc. on carry parts for the Muncie M22 that they put in the
63 late on thru 1974. Any leads on where I might order ...

YOU'RE INVITED to the Grand Opening of the Best Online International
Trade Resource!!!
Experience the world on your terms with WorldsOne.com.  Bringing
importers and exporters together for international trade and

Classic Car Shows & Events
Address:http://www.oldcartrader.com/events.php

My center armrest storage compartment and armrest need to be restored.
The problem is that the storage compartment HAD plastic support tabs
that the armrest hinge bolted onto but the plastic tabs are not broken.
I have not seen a center storage compartment that is reproduced and it

I have a 1980 Corvette that I've done a pretty complete restoration on,
but the engine is basically original and pretty beat. I really don't
want to stay with a 190 hp stock engine, but I live in California and so
I don't have a lot of choice about that. However, I've heard that ...

Hey ya all I just purchased a 1996 LT4,  I am looking to replace the current
exhaust system with something that sounds better, along with more horse
power. Stock is too mild and glass packs are too loud. I have looked at
Corsa, Flowmaster, ect........ or should I just go a ...