Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Corvette / June 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Ping Dad24 Jun 2006 17:43 GMT1
On the car I bought;   what are your thoughts on the following:
1)  I get a good paint expert to go through the paint and touch up anything
as needed (rock pings on nose or whatever)  to get it 100% perfect
2)  Put a bunch of layers of clearcoat with extra brilliant red pearl  over ...
squeeky front end '6522 Jun 2006 12:21 GMT6
I've got a '65 convertable 327/365....and the front end is
squeeking like...well, a 1965 chevy.  Everything has been
greased, and it's downright embarrasing.  Any Ideas???
I guess I'm wondering about the shocks....but it sounds like
1975 CORVETTE still here....make offer22 Jun 2006 01:43 GMT4
1975 Corvette short rear window with 1982 fuel-injected 350 and front end.
32K original miles according to title. New battery, injection computer,
master cylinder, tune up, etc. Auto, AC, PS, PB, PW, PA, mirror T-Tops,
i n f l  r e s t22 Jun 2006 00:11 GMT7
Just bought a 92 vette, no owners manual, and the car died and the
"infl rest" light was flashing. The car started  right back up but does
anyone know what caused this? What is "infl rest"?
                          thanks miwy
Reports on Use of Ethanol in C5's18 Jun 2006 14:03 GMT18
Anyone used Ethanol in a C5?
oil pressure concern18 Jun 2006 07:10 GMT4
71 coupe /350/Auto
I have noticed as of late, that my oil presure guage is showing that my
presure is lower and lower.  While driving the guage indicates about 17 to
20 and when I come to an idle or stop, it drops to 0.  I have checked the
C5 Vanity mirror18 Jun 2006 05:12 GMT5
Greetings all, I managed to break the visor mirror loose from the visor.
 Seems like all I can find is the $90-100 replacement of the complete
visor.  Anyone have a source for just replacing the mirror assembly? I
just can't bring myself to glue it to the visor.
Lost battery power..........18 Jun 2006 01:36 GMT2
I was installing a battery disconnect switch on my C6 and even with a
charger connected to the ends of the cables I must have momentarily lost
power. It's really tight working around the neg. battery terminal!
I can reset all of my driver settings but the windows in the door now ...
1975 CORVETTE Custom 32K Miles17 Jun 2006 16:46 GMT1
1975 Corvette short rear window with 1982 fuel-injected 350 and front end.
32K original miles according to title. New battery, injection computer,
master cylinder, tune up, etc. Auto, AC, PS, PB, PW, PA, mirror T-Tops,
C4 Shop Manual - Dash light replacement16 Jun 2006 03:41 GMT5
I just purchased my first Vette! It's a 4+3 85 Targa, and I love it! It's
tight with onlly 55k miles, and only needs some minor items looked into.
I worked in a service station in 73-74, and have performed many repairs
on my past "servicable" vehicles. That basically means, once ...
looking for a 1993 vette manual16 Jun 2006 01:53 GMT10
Just bought a 1993 vette and go figure no manual inside......any other
information would  be helpfull also thanks
C5 key cylinder failures?15 Jun 2006 17:44 GMT9
Hey, guys.
This is my second C5, I've had both an 03 and an 04 (think I got that
right, 04 being the last of the C5s if I recall). Twice now, the key
has failed to turn in the ignition, and after doing the service dance
Been Gone....15 Jun 2006 06:49 GMT37
My Mother was diagnosed with Cancer and it has spread through her
kidney, liver, lymph nodes and spine... so I've been torn up for the last
few weeks... Got a call today and the Social Worker at the hospital
is suggesting Hospice. She was a CPA and handled all my accounting
Re-work heads to run Ethanol?14 Jun 2006 01:35 GMT3
I recently over-hauled my 63 SB and had the heads modified to run un-leaded
gas. Will ehtnol work with the current valve/ carb. configs or will it
necessitate another mod.
Sorry to intrude......13 Jun 2006 23:35 GMT9
Want a good laugh?  google Daveinlakevilla or better yet    We hate
dave@yahoo.com
Pages: 1 2 3 4 May, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.