The neighbors think i'm a corvette snob because i cover my vette up at night
(bought a breathable, waterproof cover when i bought the car)
Here's why:
http://www.wallys-speed-shop.com/catvette.jpg

Being that my my the grommet in between the harmonic balancer andf crank is
shot. Might it be time to consider a blower? From what I understand the
flywheel needs to be fused with the crank when a blower is installed..

My '94 LT1 runs smooth for the first 50 miles until engine temp gets
hot.  When it is hot and I am in stop and go traffic with the A/C on,
engine surges and sometimes runs rough.  At that point, engine
hesitates, surges and pings when accelerating.  Any ideas what is

Thought I would install a disable switch on my C6.
Any thoughts about switching the output from the crankshaft position
sensor??

Hey group:
Where can I find the RPO codes on an '89 vert?  Specifically I am looking
for the exterior paint code.
TIA,

Spun out and hit the only telephone pole on the street.   Hit the passenger door on the miror which hit the pillar that the windshield sit in.  Yes it cracked the windshield... It runs and drives sort of.....  Let me know if any one needs parts.
--------------=  Posted using ...

I traded in my vw golf  to a dealership bout 2 years ago and it was old
and pretty beat up. I recently asked if they had records of what
happened to it and they said they didn't. I still have the VIN anmd I
want to track it down. What's the best way to go about this? I know a

Hey everyone,
    I have a 2007 Z06, black on black, competition grey wheels, 2LZ
package with NAV available now.  It is in stock and in my showroom.  If
interested please call Tristen at 800-725-5800, Springfield. Missouri.

After bringing my 72 out of a long 3 year sleep, I'm having a strange power
related problem that only effects the radio and windshield wiper motor.
After reviewing a couple of wiring diagrams, it seems that the two share a
common feed from the ignition switch to the fuse box.  I ...

The time has come to make a decision on replacement tires and while I like
some of the features of OEM runflats, one of the negatives is "cost" and the
noise level after they wear down a bit.
 I find Dunlop, Michelin and Kumho are making "runflats"...... anyone have

Hi, I don't have a Corvette, but I understand my 2006
Silverado has a version of the Corvette motor.  It's with
aluminum block and heads, 310hp, and it is noisey as hell
if you ask me.  The dealer tells me they can't hear

The Tach of my 58' Corvette always shows approx.the double RPM of the
electronic tester,
I have changed to an other/new one,it is the same. How can I fix it?
Thank you for any information

My mag red 6 speed 99 has been problem free since I bought it until last
night. I've never see a Active Handling Warming message on my DIC. My friend
see's it all the time on his 04 and it goes out within 30 sec each time.
Well mine last night did not go for about 10 minutes and ...

Hey . . . I came across this great site for auto parts and accessories.  The prices are low,
which grabbed my attention.  The site is located at:  www.carparts-accessories.com
Posted Via Usenet.com Premium Usenet Newsgroup Services

I bought a replacement antenna from zip products for my '88 C4 and
everything works great except the reception... it sucks.
I checked all my coonections, grounds (especially my mast ground) and
blammo!, crappy reception. I think it was better with the non functioning