I'm getting ready to install a new exhaust system w/mufflers on my 63 SB
that I bought from Zip- 14-gauge aluminized tubing (.070 wall).  Has anyone
used a paint on this type of  exhaust for a rust inhibitor? If yes, what
brand and did they have a good long-term result. I have ...

Does GM have any advertising budget..all I see all day & night long are ads
for the Jap cars and Dr Z...never a GM ad...how do they expect to unload
their cars if they don't even try to advertise them..Also look at the crappy
reviews for the new Pontiac solace thing..another ...

Maybe a stupid question, but here goes...Did C4 coupes come with fiberglass
tops from the factory and acyrilic as optional or was it the other way
around? Also, where is a source for 85 fiberglass tops?
Thanks

I have a hardtop for a 74 vette that I want to sell.  It is located in
central Alberta and I would like to know which website/group/classified
is the most popular with Canadian Corvette fans to list it there (as I
do not want to have to bother with shippiing)?    Any suggestions?

Don't know maybe this has been covered.  Someone just recently said that the
removable top adds regiddity to the frame.  My question.  As I drive almost
exclusively with the tinted top, which is lighter and thinner therefore not
as strong as the solid top, does my frame flex more ...

I have found the rear spring bolts on the differential mount broken
off. I managed to get the rear two out without a problem. This is a
1980 model and their are three bolts. The third is the one that would
not come out ...so I began to drill it out figuring I could retap the

CARS
'05-'06 CHEVROLET CORVETTE On models with painted roofs, the adhesive
between roof panel and frame could separate, allowing the panel to detach
and strike another vehicle. [READ FULL STORY]

Hello everyone. My '88 C4 starts great when cold but when she's hot I
have to pump the accellerator pedal to start it. I originally thought
that I had a leaky injector or two but I believe it's the mass air flow
sensor or burn off relay(s). The engine was hot and I removed the maf

I am considering .... seriously considering, the purchase of a C1 and would
like to know what to look out for in the market today.
The thought of having a C1 has been a dream for many many years. When I was
15 or 16 my dad had a 1962  327-340hp White w/Red int. and my Uncle had a

My '88 C4 looked pretty snappy except for the ratty door window seals. They
were brittle and broken. I ordered a pair of replacements from Zip Corvette
Parts:
http://www.zip-products.com/Zip/productr.asp?pf%5Fid=WS%2D4557

Why do some refer to vettes as a c1 or c2? What year are these models?
Just curious.
   Ed B

sometimes i feel like i am losing the battle with panic dirorder.
i have had pd for 17 years, but the last 3 years have been much more
severe.
i have avoided going on anafranil and xanax, and have chosen to stay

Classic Car Shows & Events
Address:http://www.oldcartrader.com/events.php

I have an 84 c-4 with removable one piece top.
I have replaced the weather stripping across the top of the
windshield.
(where the removable top sits)

Does anyone know where to find the electric seat control for a '94
vette?  I have found a driver side, but not a passenger side.  Would
appreciate any help I can get.  Really enjoy reading the daily posts
for the group.