| Thread | Last Post | Replies |
|
| 1977 4 speed with air | 30 Sep 2006 05:21 GMT | 4 |
Currently listed on EBAY http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250033473922
|
| Hey Dad, a 2000 Vette | 29 Sep 2006 16:50 GMT | 13 |
Does the car come with limited slip differential? I hear a whirring type of sound from the rear (passenger it seems); I took it in to see if maybe I had a wheel bearing problem, but it check out good. I had assumed I had positive traction, your comments are welcomed (or Ric, ...
|
| FS: 1991 Corvette - VA/MD/DC area | 28 Sep 2006 08:42 GMT | 3 |
http://www.throbbingbrain.com/corvette/
|
| !!!MAKE MONEY DOING NOTHING!!! | 28 Sep 2006 04:03 GMT | 1 |
MAKE MONEY DOING NOTHING! Take 5 minutes of your time to read this, it's well worth it! Dear Friends: Parents of 15-year-old find $71,000 cash hidden in his closet. Does this
|
| Car Sale/Taxable Income Question. | 27 Sep 2006 23:55 GMT | 20 |
I'm getting ready to sell my '90 and need an answer if anyone can provide one. Is there a way to sell a car privately in PA and put the money in some sort of account so that it will not be considered income this year? Maybe a deferred payment/account of some kind for tax ...
|
| 1978 Rebuilt corvette will not start | 27 Sep 2006 22:58 GMT | 14 |
I bought a 1978 corvette with small block cehvy 350 - I changed the cam, heads, manifold, timing chain and gears, carburator, new headers and exhaust, alternator, battery and starter - now I am trying to get it started - I tried all the TDC with the spark plug and still nothing
|
| Where do I start... | 27 Sep 2006 22:56 GMT | 10 |
Hello fellow Corvette owners, For quite some time I have been lurking in this group reading through the thousands of posts and flame wars. I write to you now in need of advice.
|
| paddle shifters | 26 Sep 2006 20:32 GMT | 2 |
Am I correct that "paddle shifters" replace the clutch and stick? Are they also available for automatic trans. as well? Last, I believe I read somewhere that the 2006 vettes have them but is this an option or std. equipment? Thanks.
|
| Timing with a MSD ignition box | 26 Sep 2006 05:44 GMT | 2 |
Hey guys Well I was busy this summer, Pulled the 327 and Transmission out of the vette Finally got the tranny rebuilt and Put an MSD 6AL ignition box, blaster 2 coil and wires .
|
| Bio-TERROR in America: The Government of Torture! | 25 Sep 2006 21:35 GMT | 3 |
AMERICA IN DANGER of its own out-of-control Bio-Terror: Is 1984 here? Or cripping... God help us, blinded! Originally Secret Bio-Aerosols are misused to HARM and Torture in
|
| Corvette sound system ideas? | 23 Sep 2006 15:51 GMT | 1 |
I have the original radio in my 63 accessible at this time. The radio worked fine on AM + FM when parked it many years ago. I had a selfmade, portable, low-tech cassette system w/2speakers that I removed from the car when not using. Is there current technology using a portable ...
|
| 96 Corvette EGR Valve | 22 Sep 2006 21:45 GMT | 4 |
my buddy got a quote for $285 to have his egr valve replaced which seemed high to me. it took me 5 minutes to change one on my Fiord Exploder. I haven't looked at it yet but I was wondering if replacing one on a vette was very involved or can it be done pretty easily? tia.
|
| C4-94 Upper Drivers Door Panel | 21 Sep 2006 17:03 GMT | 1 |
Hey Guys, I've had three (3) vettes in my life so I am not exactly clueless on this sort of stuff; but I am dealing with something that is really driving me nuts!!!
|
| C4 Digital Dash | 20 Sep 2006 23:59 GMT | 1 |
I have an 86 digital dash that went black. When I disconnect the wiring harness for about ten seconds then reconnect it and turn the key on everything works fine for about 15 seconds then goes black again.Just wondering if its worth trying to change the power supply inside the
|
| The end all | 20 Sep 2006 21:25 GMT | 1 |
One step rust killer test. 8) http://www.beachdevelopersllc.com/onesteptest/
|