Hi guys,  I've been breaking my head trying to figure this out.  I
replaced rotors, calipers flex-brake lines and pads on my '80 shark.  I
bled the system according to the sequence suggested in my repair manual.
I drove the car and the brakes were working perfectly.  However, after

I am considering adding a right hand external mirror to my 1969 vette.
The original mirror (left side only) for the '69 vette was a small head
mirror (5.5"x 3.75"). Starting in 1975, the mirror was a large head
mirror (6.25"x3.5"). Is there any practical difference between the

Just thought I would let you know there is an interesting
web site for racing and car fans at:
   www.conceptsi.com
They have a great Formula One calendar.  Probably the

Since I may have been guilty of starting this silly subject by stating that I
use Dawn to wash my car here is some of what is said about Dawn soap on
http://www.dawn-dish.com/
Don't put the Dawn away after the dishes are done. Dawn is great for all sorts

This is a non-numbers matching 1969 Roadster with a 500+hp 427/4spd.  Nice
frame off, need some completion on the interior.  Over 40k in parts recipts.
Can be seen by appointment in Temple, TX.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180058897977

In the new Corvettes, if you have had back problems in the past, does
getting in or out of the car, aggravate your back at all?
Most of the time, my back is fine unless I do something stupid and it
lets me know real fast when I'm stupid.  

I have a friend that has a 1988 corvette imported into England. There is a
problem with the L/H bonnet catch and we are unable to get the bonnet open.
Any tips or ideas on how to get to the catch or  open the bonnet.
Regards ken

My wife's 89 convertible vette doesn't have heat, the heater hoses
under hood to & from the heater core are red hot/ the dampers on the
inside swaps to all the right positions and the a/c works fine when
adjusting temps. The heat isn't hot but it isn't as cold as 31 degress

I was at a Corvette show at the Golden Mile parking lot at Pharmacy and
Eglinton in Toronto.  It must have been around 2000.  I saw a black C2
vette.  Must have been a '67 if I remember correctly.  The question I have
is about the rear wheel well flares.  Normally that car had no ...

I am trying to find a good forum for finding advise to solve a problem with
a faded dirty 15 yr. old finish with sanding, buffing and polishing.  I have
got sand papers, a m/c, and one version of polishing compound, and a wax,
but my attempts so far have not been completely ...

Man,,,,,I recieved an education real quick just from the info you guys
posted and sent via eail,,,Thanks . I am pretty much set on a "78"
Vette,,,but that may change. Also after reading some of the info you
guys sent I realize That I AM NOT stuck on a strict "puriest" type

I've got a '76 Stingray with original rally wheels on it, but i've
always loved the upgrade aluminum wheels. I came across an incredible
deal for a set of 4 original aluminum wheels this weekend, and snatched
them up. They need the center caps and emblems, but what is this i'm

Howdee folks,,,,my name is Dan ,,,at some point in the next couple
months I plan to buy a vette,,,always wanted to own one and its about
time. Now ,,,I must sy my preference has always been the C3
models,,68-82,,,does anyone have any good advise about these models,,I