| Thread | Last Post | Replies |
|
| C4 Battery | 31 May 2007 03:46 GMT | 13 |
Battery in my 1990 Z-51 died. My fault - I'm sure I let it sulfate - disconnected the float charger and forgot about it. Took a charge, lasted one day. Thought I'd explore an Optima, but found they don't make an application for the C4. Closest is their 75/25 but seems a smidgen ...
|
| C4 Injector Removal | 29 May 2007 15:17 GMT | 18 |
I've been tracking this problem down for YEARS and I think I'm finally on to something. PROBLEM: 1988 - starts fine cold and within 5 - 8 mins after shutdown. After that, cars cranks long, starts and idles rough and smells very rich. After she 'clears her throat' she runs fine ...
|
| need serious help...79 cam replacement...wont start | 28 May 2007 21:48 GMT | 15 |
Hey guys, need some real help here..my 79 had been running like garbage and was in need of a cam replacement...no big deal... I now have all back together and it wont fire at all...during installation
|
| The sales of the used cars in Ukraine has increased by a factor of 6.9 in the first quarter of 2007 | 25 May 2007 17:48 GMT | 1 |
According to the Internet sales leader www.auto1.ua during the first quarter of 2007 the sales of the used cars via the Ukrainian Internet has increased by a factor of 6.9. There was the growth of offers for the used cars of all brands, except
|
| 427 corvette engine vin number | 23 May 2007 14:53 GMT | 3 |
I have a 1968 corvette with a 427 with a 4spd but I think the engine was rebuilt at some point removing the vin number on the front of the engine. I am looking to sell the car but would like to know if there is any other vin stamped into the engine?
|
| Cars, SUV's, Trucks auctioned up to 90% off the retail value | 22 May 2007 21:06 GMT | 1 |
The government confiscates and seizes vehicles and property everyday. These items become available for purchase at government auctions. Since the government pays nothing for it, they can sell them for any price.
|
| 1979 pictures | 22 May 2007 16:31 GMT | 5 |
Hey guys, Just wanted to share with all that have been helpful in the past, and just to share in general....Found a nice little spot today and the weather wasgreat for a photo shoot...take a look. Nothing special, just my baby..lol
|
| 1963 brake fluid capacity? | 20 May 2007 15:25 GMT | 6 |
How many quarts/pints of silicone brake fluid will I need to re-fill my entire system (4 wheels+master cylinder and all new lines) and some extra to bleed system for initial start-up? It is all shoes system- w/ no power or discs. Thanx- lib
|
| '98 Need Seats Repaired | 20 May 2007 05:51 GMT | 1 |
The seats in my '98 are starting to wear out. Wondering if anyone might know of a good spot in or near Cleveland, OH to have them repaired. Thanks for your comments. 1garyallen AT gmail DOT com
|
| Water Pump problem | 19 May 2007 23:54 GMT | 11 |
I have a 1992 Corvette that was just diagnosed with a faulty/leaking water pump. I called the dealership and was given a price of approximately $650 for the job. Then I was told that the optispark module needed to be replaced since the water pump typically leaks on the unit and as a ...
|
| 63 brake fluid question | 18 May 2007 00:51 GMT | 2 |
I have replaced or rebuilt the entire brake system (all shoes- no discs or power)on my 1963 SB. I am going to run a silicone fluid in the system when I charge it up. Any recommendations on brands of fluid to use or stay away from? Thanx- lib
|
| 94 surging/bucking problem | 16 May 2007 19:31 GMT | 22 |
i have a problem with my 94 that is puzzling me. 6speed 140k miles no ses light
|
| LF: car clubs to list | 16 May 2007 08:04 GMT | 2 |
I have a website called Cat's a.s Kustoms: Parts, Performance, Passion - News for Motorheads and I'm making an online list of any Car related club sites. If you are a member of a car club and would like it listed on my website. Please email me.
|
| Navigation system in C6 | 16 May 2007 04:03 GMT | 2 |
I jusy purchsed a C6, and I need information on the navigation system. Where can I get a manual
|
| 79 cam replacement | 16 May 2007 02:55 GMT | 1 |
Hey guys, Just an update...I took alls advice..tom, set the timing as diredted, eugene , set the valves as directed... Al. my aplogies..both valves Are closed at tdc..lol..got it running...after rotating distributor 180...burned the
|