| Thread | Last Post | Replies |
|
| Well shes gone!!! | 15 Aug 2007 18:48 GMT | 10 |
Just temporarlly though!!! I towed the Vette down south last weekend getting some new fiberglass, Fixing some cracks and a fresh coat (or 8) of paint. Engine and trans came out this week, both getting a good work over. Mainly the tranny engine is
|
| dash lights | 15 Aug 2007 14:20 GMT | 4 |
I've ready that the bulbs in the dash, on a C4 can be replaced with 194 bulbs and appropriate bulb holders. good side is the bulbs are cheaper, and easier to get but the down side is the dash is dimmer.
|
| Interesting problem to try... | 14 Aug 2007 05:05 GMT | 9 |
Here is an interesting thing to try. I have a 2007 Corvette with OnStar and Hands-Free Cell Phone using Verizon Family Plan. Try this... Dial 511 (for Road Information in most States) Dial 911 for Emergency
|
| Ping : Butcher | 14 Aug 2007 04:28 GMT | 18 |
Howdy. Did you get your overheating problem solved, or lessened ?? I see that Texas is approaching the stage of heat only found in Hell ! In addition to the 1970 BB, i also have a 2006 LS2 with a 160 f. stat installed ; this cooling system is remarkable as when its 98 f. outside
|
| double camel back heads | 14 Aug 2007 04:02 GMT | 14 |
I hear the 327 I have came from a 'vette. I hear the heads are 'nice.' I put the thing in a 350 monza, but never got around to finishing that project. How special are the heads anyway? Carl K
|
| Thinking of upgrading to C5 | 13 Aug 2007 17:21 GMT | 59 |
Hey Everyone I currently have a '90 C4 red/black 6-speed and am thinking of upgrading to a C5. Is there a particular year that was better than others in terms of
|
| C3 Front Sway Bar Bushings | 12 Aug 2007 23:39 GMT | 1 |
Rebuilding the front suspension (1977) and noticed that the front sway bar upper bushing (on both sides) is smashed like a pancake. What would cause this, and is there anything I can do about this? Possibly improper installation procedure? By the way, the bushings are rubber.
|
| Rear Spindle / Bearing Tools - Used | 11 Aug 2007 12:03 GMT | 2 |
I would like to purchase used tools to rebuild my 72 Vette rear spindles. I am looking for al of them - bushing flaring tool, spindle setup tool, etc. Please email me if you have any C3 Corvette specialty tools for sale -
|
| Ignition Switch | 08 Aug 2007 20:36 GMT | 9 |
I have a 76 that needs the ignition switch changed. I have the wheel off, but can't figure out how to get the next piece off to get access to the key clinder and switch. It looks like a flat plastic cover. Thanks for your help
|
| C6 Reaview Mirror | 08 Aug 2007 19:07 GMT | 4 |
Have a 2006 C6 with the manual rearview mirror. When I exit the car the instrument lights shut off immediately as expected but the reading lights on the mirror remain on for about 15 minutes.
|
| 1963 250hp timing specs? | 08 Aug 2007 15:07 GMT | 6 |
What is the initial timing of the distributor (w/vac. adv. plugged) @ 600 rpm? I have the shop manual and can't find this setting in it. Can anybody relay to me the page this setting is on, if it is in the manual. I've went thru the specs' page and can't find it anywhere. Thanx- ...
|
| 2007 Vette Time | 05 Aug 2007 18:52 GMT | 3 |
I drove from Nebraska to Indiana this last weekend. I expected the time on the radio to change when I went from Illinois to Indiana (CT to ET). The time did not change. I believe the clock gets its time from the GPS, so why doesn't it change
|
| 1975 Stingray Corvette Convertible... want to sell | 05 Aug 2007 15:40 GMT | 19 |
I have a 1975 Stingray Conv. that I have to sell. I have no idea what she is worth. I bought her a little over ten years ago. The Stingray is solid but needs tender love. Rebuilt with 28k miles, new interior, brakes. Can someone guide me in a direction. I paid $10K. I will be
|
| Incentives yet on 07's and question re: Supplier Discount | 04 Aug 2007 14:47 GMT | 1 |
Anyone heard of any incentives on left over 07's? I was at the dealer today and there were 5-6 07's and one 08. Manager said he'd sell any 07 for $500.00 over invoice, whatever that is. Also, I'm eligible for the GM Supplier Discount. Anyone know if they
|
| Engine shutdown | 03 Aug 2007 18:37 GMT | 2 |
I have a 95 Vette with 77k on it. I bought it 2 1/2 yrs ago. It had 75k. A couple of months after getting it I was at a stoplight and it stalled. When I restarted it would only turn over and over. I waited 10 minute's or so and it fired up with
|