http://www.youtube.com/watch?v=GTibuuge1JY&mode=related&search=

Mine goes into hybernation up here in northern illinois on Nov.
1st...just before the first snow flies.  I keep it in a heated garage at
35 f.  with the cover on. , and,  do an oil change and lube just before
retiring it.   I also put the insurance on comprehensive only till March

I now have approx. 1500 mi on total re-build (block was bored, new rings,
seals, etc.) and still blowing smoke out exhaust when accelerating from
stop. The machine shop that did the boring and supplied the parts for the
job are not being very helpful or forthcoming in identifying ...

I seem to be getting a lot of threads lately that Dave is the first person
in the thread, yet he is replying to some message I don't see.
I have no one in my blocked lists.  (Yeah, crazy move, but I can be thick
skinned.)

1998 C5 Coupe
Under the front clip is 3 black plastic strips I understand the middle one helps pull air up into the radiator.
When I bought my Vette they where all broke and removed, I need help because I do not even know what
they are called...

 I am in search of a yellow convertible C5, 2001 to 2003, lo
mileage. From the searches I did, it'll cost around 35 thousand i
general. Since I've never had a Corvette, I would like to get som
feedbacks on what to look when evaluating an used Corvette. Thing

'davros@maggotpunks.co.uk (Adrian Miles-Davros)
'
RE:  Your 'alternative music' Band, the MaggotPunks...Do you ever play
at Christian venues Adrian ?  If you guys ever come to the U.S., id like

WOW...over the weekend, I took the dive, and purchased a life long
aspiration; the new 008 corvette coupe!
Just hop'n someone would notice; beside, all the other gapping tourist,
who inch-up along side with their mouth's wide open.

I'm having one heckuva time finding the MAF sensor power relay on my 1996
vette. Anyone know where this relay is located on the vehicle?  Thanks.
Clay

My 94 convertable starts to vibrate around 65 mph.
Feels like it is in the back of the car.  Can feel it through the gear
shift, so could it be drive shaft?   Car is just at 100K.
Recently acquired the car, first vette, so no history on the car and not

I see that the correct mirror ( longbase)is specific to my 63E. Does the
interior door panel need to be removed to install a mirror correctly or is
it done externally? The driver side has been replaced with a generic
mirror.I am considering replacing it and doing a new install on ...

86  corvette   air  condiction   works  fine   until   i  hit  a
bump  in  the  road  or  make   a  sharp  turn   it s    blow s  hot
very  hot   air   and   stay   hot     help

I removed my O/S LH mirror today and discovered that the mount appears to be
from a 63L to 67E, according to catalogs. Would it be possible that the
screws that hold the mirror mount to the body would match up with the screw
spacing on the 63E long-base kit. I can't tell by ...

A buddy of mine has a few C3 Corvettes for sale including a 72 Vette Wagon.
Here's the site:
http://www.rickscollectables.com/catalog/index.php?cPath=21_23

I have a pretty clean 79 L82 vette that Id like to  put a performance
cam in...   question   do I need to take out the motor or is there
enough room to take out the cam without removing the motor?    Also
any suggestions on the type of cam?  I want something that gives