87 Corvette....118K miles...
I'm having a problem with brake lights and backup lights not working.
I've checked the obvious --- bulbs, fuses, etc., and now at a loss as
to what could cause this problem.

I'm looking to purchase both seats for my '74. When I bought the car
it had some aftermarket seats in it (anyone interested in these?). I
would like to get back close to the originals. I have a few questions
for anyone who might care to answer. Provided I have the right

I'm going to get agreed value insurance for my car and am looking at the
American Collectors company. Has anyone ever filed a claim with them and how
did it go? Any other suggestions along these lines of agreed value policies?
Best,

Can any of you number nazis...tell me what these two intakes are from.
Thanks in advance.
1. casting # 3794129
2. casting # 3731398

http://www.time.com/time/specials/2007/article/0,28804,1658545_1657686,00.html?c
nn=yes
Or, for the quick tour   (making note of #31)
http://www.time.com/time/specials/2007/completelist/0,,1658545,00.html
Ken

Had the 1970 BB Hooker Super Comp. Headers Jet Hot coated at their
Mississippi plant ;  elected to go with the 1300 f. Sterling Coating .
I have a Lazer Thermometer and after a good long run, i measured 532 f.
(at idle)  right where the Header pipes meet the Cylinder Head , before

Learn everything you want about car air conditioners.
http://car-air-conditioning.blogspot.com/

I have a '72 BB hood. Needs a little work. Will send .jpg if interested.
Both corners have been abused. Located in Mansfield, Ohio. Make offer.
Dennis

anyone replaced one?? mine was sagging so i pulled it apart.. the fiberglass
insulation under it came apart.. corvette america listed the assembly but
they cannot get anymore.. corvette america has a replacement one that has a
pressboard back on it ($150)..(midamerica has one ...

'90 L98 Vert. Service Engine Light would come on after about 15 minutes of
driving.  Any time I would turn off the engine, it would reset.  Comes right
back on when it warms up.  Took it to local Firestone. They said my EGR
valve was badly stuck.  Said if I continue to drive as ...

I want the brake pedal to engage the brakes further from the floorboards on
my 63 (non-power, shoes/drums). I pulled the drums before I started my run
home, and turned the adjusting star-type nut in the front brakes so the
shoes moved closer to the drums. (There are no holes in ...

This probably has just popped up. When engine temp hits 200 degrees
the engine shuts down. Something wrong with waterpump? Coil?
I am lost.

I did a dumb thing and cracked my Targa top right on the back left corner.
A piece about 2" x 1"  broke off and now I need to repair it . Any ideas out
there on what type of glue would be best?
The piece broke off as i tilted it too far upward while it was in the rear

I had a good 2-day run on the back roads south from Wash. state to N.Calif.
Labor Day weekend with my son in my 63 Roadster. We left without approx. 400
mi. on motor and arrived with about 1350 mi. It was tight at about 3700 rpm.
when pulled out and was tight at about 4500 when ...

Ok group.  I have heard of Camaro SS, Nova SS, Chevelle SS.....but Corvette
SS?
My wife and I got into a minor spat, I told her there was no such thing as a
Covette SS.  Humbled again by the Misses.  I saw a link to a new Vette SS