Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Corvette / April 2008

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Rear Spring Pack Creak30 Apr 2008 02:13 GMT1
I've had an ongoing problem with the rear leaf spring making a loud thud
when going diagonally into a driveway to keep from scraping.  It's on an '04
Z06.
I believe it started after I had a fuel pump replaced.  It's my
small automatic shift issue on 76 vette30 Apr 2008 02:09 GMT7
I notice that when I put the ole slug into gear that the position
between drive and neutral does not lock in. In other words, I can push
the shifter into neutral without pushing the shifter button. All the
others lock in.
What tires? 74 BB Coupe28 Apr 2008 05:48 GMT1
It is time for new tires on my 74 stock big block 4 spd coupe. Currently
running 235/60 TA's, thinking of staying same just wondering if anyone has
any opinions or recommendations as to tire and size options. Thanks
No Current in Car28 Apr 2008 05:48 GMT4
I just installed a new temperature gauge in my '69 vette. To test the
gauge, I tried to start my car. The engine turned over about three
times, without starting. This is not unusual since the car has been
setting up for almost two weeks. However, when I turned the ignition
Where does gas overflow go?27 Apr 2008 23:02 GMT6
I have no idea what happened to the pump, but it didn't shut off and I was
in conversation with someone (I wasn't pumping the gas, though).
When I turned and looked, it was spraying gas all over the top of my C5 and
overflowing all down the side.
Parking/Turn Signal Lights26 Apr 2008 18:02 GMT2
I blew a bulb - 3157nak
and followed the recommendation below -
cool, no jacking up the car, but...
I am not familiar with a 3157nak bulb.  I am able to reach it, even with
FS/ 94 Convertible20 Apr 2008 01:45 GMT2
FS/ 94 Convertible
Only posting for a friend.
Interested parties, please phone seller directly.
94 / Corvette Convertible (ragtop look)
Lug Nut Torque17 Apr 2008 13:36 GMT3
1986 Corvette all stock with stock wheels.  Suggested Torque on lug nuts?
Does 90lbs sound right???
Corvette ZR1 destoryed even before being released17 Apr 2008 01:33 GMT5
http://www.autoblog.com/2008/04/08/nissan-gt-r-v-spec-lap-times-stun-observers/
Nurburgring times
C6 ZO6 7:43
Corvette ZR1 ? 7:42?
Service Steering Column12 Apr 2008 09:25 GMT15
Ok, I've got the dreaded "SERVICE STEERING COLUMN" on my 2004 Z06.   Other
than I need to go to the dealer and fight with them over warranty coverage,
what does this error message usually mean?  The steering column adjustment
and lock up when you turn off the key seem ok.  The ...
LF Info on 71 distributor12 Apr 2008 02:19 GMT4
Gents,
Hope someone can point me to the right information.  I have a 71 350/270HP
coupe and the previous owner replaced the distributor, but with the wrong
one, as I need the one with the tach-drive.
omg love this car11 Apr 2008 21:04 GMT4
Loved my c4 targa.  Never thought anything could be better. Drove....
really drove my
new used 01 convertible today.  Oh my god.  Quiet and smooth, great
acceleration, no flex no squeek, no cowel shake.
WTC Towers: The Case For Controlled Demolition11 Apr 2008 14:31 GMT9
In this article we show that "top-down" controlled demolition
accurately accounts for the collapse times of the World Trade Center
towers. A top-down controlled demolition can be simply characterized
as a "pancake collapse" of a building missing its support columns.
creak in rear 01 c511 Apr 2008 14:19 GMT3
Just picked up my blue convertible.  Love it.  Great car.  Loved my
96, would STILL love my 96...  05 is just better.  (c4 may have been
more fun)
Anyway, I am very partricular and found 3 problems.  2 I can deal with
1990 Brake material question08 Apr 2008 20:55 GMT1
I have a 90 c4 that I am going to redo the brakes on this summer. I
auto cross it some and otherwise drive it like I think a vette should
be driven. The question is; Do drilled rotors actually perform any
better then non drilled, and more important semi-metallic, kevlar, or
Pages: 1 2 March, 2008
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.