Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Malibu / April 2008

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Malibu Pull a trailer?30 Apr 2008 19:02 GMT2
Will a 2001 Malibu with a 3.1 engine pull a light pop up trailer?
The info on trailer hitches seems to suggest by lack of reference,
that the Malibu is not to pull trialers.
Are there any guide lines on the weigh trailer a Malibu will pull?
Malibu starting intermittently26 Apr 2008 17:18 GMT2
I have a 2002 Malibu thats starts intermittently, had battery,
alternator, and starter. All checked out fine. when the car doesn’t
start, I get it jumped and it’ll start up for a couple a days and cuts
off. Whats the problem? and How much would it cost to get fix?
2001 Malibu head bolt torque23 Apr 2008 03:26 GMT3
Haynes manual says to tork head bolts  to 37 lb then turn 95 degrees
in the order noted. Results seems to be inconsitant torque on the head
bolts.  Some bolts seem to be looser than others if I do this,
especially the bolts on the ends of the head.  Is there a problem if I
marker lights inop21 Apr 2008 20:21 GMT2
I have A chevy 3500 van that the rear marker/parking light do not work
fuses are good relay is clicking
--
mikecutks@live.co
Sensor on side of master cylinder21 Apr 2008 02:31 GMT1
Today, while refilling the washer fluid on my 1998 Malibu, I noticed that
the sensor that goes into the side of the master cylinder looked like the
connection was loose.  When I pulled on it, the sensor part pulled right out
of the plastic body it was supposed to be connected to. ...
2001 Malibu Fuel injectors20 Apr 2008 17:29 GMT2
In removing the fuel injectors on a 2001 Malibu, I found them hard to
remove due to the rubber seals being so hard and crusted.  When I
re-install them, is it wise to use a lub. or some sort of conditioner
on the new rubber seats and the o rings?
Horn Relay07 Apr 2008 02:24 GMT1
Recently my horn stoped working.
Yesterday I measured the connections to the horn relay and found the
12volts is measuring 10.4v.
I verified the battery and other relays to have 12-volts, but this is the
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.