I have a 1995 C1500 and the AC in it works great cold and blows real strong.
Mostly since the last owner had it completely redone (about 8 months ago)
right before he sold it to me.  But the problem is that it has a very
annoying constant clicking sound but what is really odd is ...

Hello Group
While I stay here in CA in vacation I try to find a front windshield for an
'61 Chevy Apache, which (if found) will be sent home then.
After browse trough many of those Chevy-Parts websites without success, I

Greetings, I know this is a silly question, however because I'm a girl I'm
allowed!
Does anyone know what the length of a long-bed is compared to a
short-bed?

gonna change valve stem seals on a 91 Z71 350 in the next day or so and need
a question answered.
Using viton umbrella type seals, should they go on all valves or just the
intakes as the G.M. manual says and do I need to use the O- rings under the

I remember seeing in Summit a few years back of a company that made a
complete kit for chevy's 88-93 which included electric fans, harnesses,
and shroud to bolt up and replace the clutch fan. The kit cost about $400.
I cannot seem to find such a kit on summit's website. Anyone ...

What transmission Does A 1991 K2500 7.4L use is it the 700r4?
Will a 700R4 off of a 1989 K1500 5.7L work?

My 88 1500 4wd developed a squeak coming from the drivetrain.
It only happens when moving and seems to go away above 20mph.
I jacked up the rear end and sun the tires, nothing.
I put the transfer case in neutral and spun the tires again.  I heard a

I have a 96 Astro 2 wheel drive.   It is the first van that I've had
with a spare tire under the body.  The last van had the spare attached
to the rear door.  
I was attempting to change the spare tire, didn't know that there was

I cleaned injectors a couple times by using my mighty vac pump hooke dup to
the rail end of the injector, create a vacuum.
Hook the injector up to a light 5v AC adaptor, and put the engine end of the
injector in a bowl with carb cleaner.

Hope someone out there can tell me something about this situation - I'm
getting no help from GM.  Sorry for the long post, but the details may be
important.
Here's the story.  I've got a '96 1500K, 5 speed, 4.3l V6.  For a few years

Anybody know if there's a separate fuse installed for the trailer wiring
harness on this van?
I bought the van new with the trailer tow package installed; the wiring
harness was taped up under the frame in the rear, all wires nicely labeled.

I have a 97 GMC with a 4L60E transmission behind a 350 engine. I noticed
a couple days ago when the transmission shifts into 4th there is a buzz
or moan when it does this, right before the converter locks. It only
seems to do it hot. The fluid and filter was changed approx 2500 ...

What transmission Does A 1991 K2500 7.4L use? is it the 700r4?
Will a 700R4 off of a 1989 K1500 5.7L work?

My Grandfather has a 97 C1500 with a 5.0. I think it's a Vortec engine.
It's always been hard to start cold, so I did a full tune up and ran great
when warm, but you just couldn't get nice throttle response when you gas it
in Park. Now, the truck is almost impossible to start cold. ...

So I have a '79 Chevy/GMC 3/4 ton truck and it's at that point in its life
that wierd stuff is starting to wear out and need replacement.  For instance
the clutch linkage.  It has a lot of slap due to worn joints and shafts and
whatnot.  So basically my question is, what is a good ...