I was looking through Jeggs at the ring & pinions.
They have some extreme drag racing set ups. This sounds like the perfect
setup for an extreme rock rig, right? Able to handle extreme stress, torque,
etc. But it says not for street use. I was wondering if anyone could think

I am finding Rotor prices ranging from $30 to $130 for my 99 K1500 Suburban.
What is the difference in such a range?

I put new pads on my 99 Suburban K1500 4x4 about a month ago.  I then
noticed that there was a slight pulsation in the pedal and decided to
replace the rotors because the last time they were turned they said it would
be the last time and they would have to be replaced.  About a ...

I need some help. Does anybody in this group know where I can find a parts
list or diagram for a rear end on a 1997 Chevy Silverado. I have search
Google and  yahoo and found some for other autos but not for mine. Any help
would be greatly appreciated. Thanks in advance. Mike

Found it in front of the radiatior, thanks to all. Now, how do I get to it?
Can't get in from the top or the bottom. I disconnected it from the plug and
the display went to 0C. Reconnected it and it went back up to 128 so I know
I've got the right thing. That part wasn't hard, but ...

Anybody have experience/comments regarding cryogenically treated brake
rotors?

While under my truck this weekend I found the right front shock was wet.
Haven't removed it or viewed enough to confirm its coming out of the
shock but the little truck is a bit twitchy at 70 MPH and sometimes has
a lope which I can't pin on the tires or road. Have considered ...

So what is it and what are the benefits/detriments?

Need some help my turn signals don't work but they light when I turn the
lights on and blink when I use the hazards...fuse looks fine.  Any help is
greatly appreciated

I'm thinking of lifting my truck, nothing too great, probably 6/7" inch
lift, what are the draw backs if any, and what lift manufacturer should I
consider, or which provides the best kit?

My 94 4x4 S-10 blazer makes a clunking sound only when the wheels are
turned sharply and hit bumps in the road. Any other time the truck rides
great. I just replaced all 4 ball joints (for the 2nd year in a row) and I
can't find anything else loose or bad. Anyone seen anything like ...

There is a high pitched squealing from under the hood of my '90 Chev half
ton. What is the best way to tell what it is? I believe it may be the
water pump but don't want to replace it without knowing for sure. I'm
going to replace the serp belt, since it needed it anyway, and take ...

Hi all. I just purchased a used 2002 LS Blazer 4x4 with 35,000 miles.
I am having an intermittent problem. when making right turns only,
sometimes, (not always) there is a squeaking sound in the front end
which coincides with speed of the truck, also only sometimes when you

I've got an 88 Suburban 350 with cruise control. I drove from NC to FL
and back a few weeks ago. The crusie control was acting uup most of
the way.
I'd bring the truck up to 70mph or so and set the cruise. It would

has anyone used Permatex Rust Treatment. its not Navey jell but I been told
that it works /  BUT I love to here from some one that used it. if it works
and it will not harm a new paint job !!!
From there web site