Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / September 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
2004 Astro van25 Sep 2004 17:15 GMT1
Just bought one, and still have my 98 Astro as well. Found one difference:
the turning raduis in the 98 is much better (i.e., tighter) than in the
2004.  Aside from the tire size change (15" in '98 to 16" on '04), any idea
why this is?
98 Sierra fuel pump25 Sep 2004 17:13 GMT5
I'll be the first to admit that I'm a total dumbass when it comes to repairs
on my 1/2 ton.  My truck was not turning over, it was catching good, just no
gas getting threw.. simple fix I thought!  I take my truck to the garage,
Buddy phones me back a few hours later, tells me to ...
How does GMC-Checy 4x4 really work?25 Sep 2004 17:09 GMT12
.
On a friends 1996 Yukon 4x4, he was parked on a hill facing across the hill.
Over night, some snow fell, not more than a foot or two..  When he went to
move in four wheel drive, both uphill tires rotated and he could not move.
s-10 and manual tranny questions25 Sep 2004 15:26 GMT2
Hello group,
I have a '96 S-10 w/ the 4.3L and a manual. Every so often when I pull away
from a stop it pops out of gear. Now the first couple times it happened I
thought "oh I didn't have it in gear all the way" but the problem is getting
83 Suburban Carb M/C solenoid ticks when igition on25 Sep 2004 07:09 GMT1
Any 83 owners w/CA carb hear the M/C solenoid tick when they turn on the
ignition, but haven't started the engine yet?
Please help me in scientific research25 Sep 2004 06:20 GMT1
I would be very grateful if you could fill short questionnaire. It
takes only about 1 minute. Your answers would be very important and
helpful for me.
The questionnaire you can find at the address:
Re: Mobil 1 vs. Valvoline?25 Sep 2004 05:35 GMT3
I have noticed a lot of traffic to my website regarding this post and wanted
to clarify that I am and Amsoil dealer and you will find information on
purchasing Amsoil on my website however it was not my intent to drive
traffic via this post.  I apologize if you feel misled in any ...
Voodoo Performance Muffler25 Sep 2004 02:19 GMT4
I just had a voodoo performance muffler installed on my 94 chevy truck
and man it's sounds dam good! Its got a sound that is different than
the flowmaster.  The guy i bought it from actually hand constructed
the muffler.  If you guys are tired of the flowmaster sound, give the
plug gap for 1990 35024 Sep 2004 22:29 GMT2
I replaced the plugs in my 1990 GMC 4x4 (350 cid) recently and was
told that the gap should be .035".  I thought that sounded low... can
anyone verify?
Tom
wiring24 Sep 2004 17:09 GMT1
I have a 74 gmc 1/2 ton p/up that has a prob mabey someone can help
with.
When I turn on the LEFT turn signal the dash lights and the RIGHT side
turn sigs light up dim and flash with the left signal.
Towing24 Sep 2004 15:09 GMT6
 I have a new 04` 2500 HD,with the 6.0
It now has 650 miles.
My question is,when would it be ok to start pulling my 5000+ lb trailer?
Thanks!
03 Sonoma limited slip24 Sep 2004 00:59 GMT7
I have a 4.3 limited slip option on my 2wd Sonoma.  How exactly does it
work?  Does one wheel slip enough than engage the other wheel?  Any info
appreciated.  This truck is fun in the snow.  I may be completely sideways
but still heading in the right direction!
OEM Seat/lap belt replacements (complete)23 Sep 2004 18:39 GMT1
93 Chevy S10 Standard Cab.  Any suggested vendors?
>G<
help needed -exhaust manifold23 Sep 2004 06:46 GMT1
I just purchased a set of Hermoff  6123 and 6124 manifolds for my 1994 Chevy
truck. These manifolds have a hole for a AIR emission device which my truck
does not use. What do I use to plug these holes on my application? My local
autoparts store where I purchased these items was ...
My future 1990 GMC F/S Jimmy.23 Sep 2004 05:10 GMT5
It ain' no Chip Foose but I guess it's a good start.
GMC Gremlin
http://geocities.com/hawkeye649box/my_future_truck.jpg
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 August, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.