| Thread | Last Post | Replies |
|
| ABS Working? | 06 Oct 2004 01:10 GMT | 12 |
2003 GMC Sierra 1500HD Crew Cab 2WD During the last two months, I have two instances where extreme braking was needed. Both times I heard 'wheel squeal', as if the tires were locking up. I have 4 wheel Antilock disk brakes on this truck, but not sure if they are
|
| GMC Sierra Fender Repair | 06 Oct 2004 00:45 GMT | 3 |
I put a dent in the passenger side fender this past weekend. I belive it's going to have to be replaced. The body shop wants $1000 ($225 part/$800 labor), and I was wondering how easy it would be to install the fender myself? I've found fenders online at fairly decent prices,
|
| Chip | 06 Oct 2004 00:01 GMT | 20 |
What are your thoughts about chipping? I have a 2000 Silverado PU with the 5.3l V8. Any recommendations?
|
| Heater Problems | 05 Oct 2004 23:37 GMT | 12 |
I just purchased a 1998 GMC JIMMY with 115000kms on it and when I turn on the windsheild defroster there is barely any heat comming out even after I have driven several kms. The fan motor works fine but the air is barely warm comming out. Does anyone have any idea what could be the ...
|
| Planning on buying something... | 05 Oct 2004 23:16 GMT | 1 |
I've never purchased a "model year closeout" vehicle, but I'm going to plan on buying a 2005 Chevy Tahoe LT by this time next year. Based upon what you all know, can you tell me what I could expect as far as "discounts" or "lowered prices" among those go? Is it something that
|
| Better Muffler | 05 Oct 2004 23:13 GMT | 4 |
I've got a Chevy Silverado pickup with 5.3L engine. Can anyone recommend a muffler to improve mileage with only a small or medium increase in sound level? Jon
|
| before i slap on the new fly wheel... | 05 Oct 2004 23:13 GMT | 1 |
long story short i was having trouble with my 76 chevy 350 not turning over and have found out that my fly wheel has some teeth broken off of them so before i replace the flywheel and all, was wondering if there were any other reasons or suggestion of why my starter would be eating
|
| "04 Silverado Tire size | 05 Oct 2004 18:31 GMT | 3 |
Hey gang, I just bought a "04 Z71 Silverado. I'm looking at putting 17x10 Weld wheels on it with BFG All-Terrain T/A 37x12.50R17's. How high do I need to lift it to get these under it ?
|
| Typical problems with Tahoes? | 05 Oct 2004 16:33 GMT | 2 |
Does anyone have a quick list of typical problems with 2003 Tahoes? I purchased a 2003 about a month ago, and apparently the seller didn't do too thourough of a check on it when they received it. The passenger front wondow motor barely rolls the window all the way up
|
| Fuseable link size | 05 Oct 2004 15:18 GMT | 8 |
I added a battery isolator to my 2000 S10 and have the alternator connected straight to the isolator and the old line from the battery to the alternator goes to the Battery 1 terminal of the isolator. To be safe I want to put a fuseable link in the line from the alternator but ...
|
| Brakes | 05 Oct 2004 06:21 GMT | 5 |
Hey gang, As you can tell by my email, I'm no mechanic but I have a question. I have a 97 S-10 Blazer 4X4 that need brake pads in the front. The question is, do I need to worry about anything while swapping out the
|
| Colorado Opinions anyone? | 05 Oct 2004 04:02 GMT | 19 |
I am purchasing a new Colorado. I think it is a great filler between S-10 and Silverado. I live in Boston, so size is an issue. I like my Z71 truck with extended cab. It is bigger than a Ranger and S-10. The I-5 engine is more horsepower and torgue than the Ford and Chevy V-6.
|
| Tranny hesitation and shifting hard | 05 Oct 2004 03:43 GMT | 15 |
I have a '93 1500 2wd truck with auto tranny. Lately it has had a hesitation engaging when taking off from a stop. It also shifts quite hard, it used to be a very smooth shifting trans. It has the proper amount of fluid in it. Does this sound like a simple fluid change or is
|
| 95 Sliverado Z71 1500 stalling | 05 Oct 2004 03:36 GMT | 6 |
My 95 Sliverado Z71 1500 will stall out as I am driving it. Most of the time it starts right back up. Sometimes it takes a few minutes. Any Ideas???
|
| Rear window flag How to clean? | 05 Oct 2004 00:43 GMT | 2 |
I have one of the flags in the rear window of my truck. The kind that you put on the window and you can see out of the truck. When it was new it was fine but as time goes on it is getting harder to see out (really bad at night).
|