anyone know what size extractor to use to get a broken stud out of my
tranny? went to change the fluid out and busted one of the heads right off
clean. I figure I just have to centerpunch the stud and drill it and then
try and extract it. Only problem is I don't know off the top ...

My '91 Sierra Ext. Cab Short Bed 4x4  Automatic (350 TBI) has just turned
162,000 on the clock.  New stock 350 is at the mechanics shop.
I am putting Edelbrocks Multi Point Fuel Injector on it. Edelbrocks
catalogue shows the manifold with the EGR valve installed, my guess is that

They finally have the new stainless steel  cable replacements in. Only took a
year!

I have a 1990 Chevy, PU, 2WD, 350CI. I am looking to get some
suggestions from this group on tire selection. I am staying with the
275 X 60 X 15, I have over the years had BFG, Uniroyal Tiger Paw,
Dunlop Qualifiers which I think the Dunlops where the best. I will

From EDMUNDS:
"Cons: Cheap interior materials, questionable build quality."
"Chevy takes a step backward this year with the return of rear drum
brakes, as opposed to last year's four-wheel disc setup."

Hi all, I've got a 81 chev half ton, and I need to know how to set the fast
idle for when the engine is cold.  Obviously I'm pretty green, so any detail
you can give me would help alot.
Once the engine is warm, it runs perfect.  But when it's cold, each stop I

I've a 99 Silverado K1500 Z71 that has one of these on it similar to this
http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=209961&prmenbr=361
I don't know when it was put on as it was on it when I bought it about 6 mos
ago. I've looked into the prices of replacing it ...

Hello all. I just bought an '89 Chev Suburban.....trying to prep it for a
safety, and for an emissions test. I thought I'd check things out at this
newsgroup. The truck is a 1500 4X4, quite a few miles (290,000 km). It's a
little rough; but quite straight and not much rust. I don't ...

I have a 95 GMC k1500 with a 5.7 L and I can hear a steady clicking sound.
It is hardly noticeable when the truck is cold but after about a 30 min trip
I can definitely hear it from in the cab and is very predominate when I
listen by the intake.  The truck also seems to be ...

Sorry if this has been covered before.
1996 GMC Sierra SLE shortbed/Ext Cab
I want to level the truck out and have been looking at shackles that say
they can drop it 2".

I have a 1998 GMC Sonoma  in which both the radio control faceplate
and the climate control faceplate  of the dashboard is
getting  hot. Sometimes this problem spreads to the instrument
cluster as well. Its doing this most of the time but not every day.

ok, so we replaced the master cylinder, we bench-bled it as directed, then bled
the brakes.  started it up, and instead of a full-floor mush pedal as before it
was now like the engine was off, a hard pedal with little grab requiring a very
hard push to stop the truck, and the engine ...

Has anyone converted the ABS/work two square headlight grill on a 94
Suburban to the Chrome/decorative two rectangular headlight grill?
I have the ABS grill on a Cheyenne Suburban.  Its a nice work truck, but I
hate the grill.

I have a 95 Suburban, power windows.  The drivers side has a squeaky sound
when moving up or down, sounds as if its coming from the front rubber rail
area.  Is there a way to lubricate the rails the window slides in?

When I am driving I approach a hill and with steady pressure on the gas
pedal when I start to rise up the hill my truck feels like it is trying to
kick into overdrive and then decides that it does not want to and kicks
back out.  It only does this when I am going up a hill.  I just ...