| Thread | Last Post | Replies |
|
| Vacuum routing in 89 Suburban | 28 Nov 2004 01:41 GMT | 1 |
I have a 89 Suburban 350 FI 700r4 with 165,000 miles I have MANY problems but I'll list the most annoying first. First of all the motor and trans seem to be running very well. Except for my 8mpg fuel econ. I don't know much about repairing vehicles but I do know that vacuum hoses ...
|
| Need advice on '89 Suburban | 27 Nov 2004 23:24 GMT | 1 |
I have a 89 Suburban 350 FI 700r4 with 165,000 miles I have MANY problems but I'll list the most annoying first. First of all the motor and trans seem to be running very well. Except for my 8mpg fuel econ. I don't know much about repairing vehicles but I do know that vacuum hoses ...
|
| Orange county, Speed limit reduced? | 27 Nov 2004 21:47 GMT | 3 |
I was coming home tonight, and since the traffic was rather light, I was able to notice the new speed limit signs on the 22 east, from the 5 south to the 55 south. the speed limit on this stretch has been reduced from 65 to 55. How many other sections of SoCal freeway have been ...
|
| cheyanne 3500 | 27 Nov 2004 02:05 GMT | 2 |
anyone ever have problem with oxyen sencer ?????????
|
| 94 s10 | 27 Nov 2004 00:13 GMT | 5 |
Looking at a 94' S10 with 200,000k. The truck looks good and appears to run fine. I'm not to experienced with Chevy's, is the 94' GM v-6 motor any good?
|
| ABS locking up... | 26 Nov 2004 23:47 GMT | 4 |
I have a 1994 s10 pickup with 4 wheel ABS that are locking up with moderate pressure..Will after market 16" wheels make my abs brakes act up?..I have new rotors/drums and pads that made no difference..TIA..Jimmy
|
| Replacing 4.3 L with 350 | 26 Nov 2004 21:21 GMT | 1 |
I have an 1988 GMC 1\2 ton with a lunched out 4.3L v6 and will be replacing it with a 350 from an 1989 Suburban which I purchased as a complete running vehicle. Both are 700r4 autos as well as TBI. What parts will not fit the 1\2 ton from the Burb and what will I need
|
| On-line Parts Catalog | 26 Nov 2004 17:43 GMT | 4 |
Is there a way that I can research GM parts on-line? I am looking for parts swaps between different GM Vehicles, generally body parts. An example is I would like to compare if there is a different part number
|
| 1997 Chev S-10 Driveshaft 2WD | 26 Nov 2004 14:24 GMT | 3 |
I have a question about my 97 S-10s drive shaft. In the rear of the drive shaft behind the Center Bearing there are two joints conjoined, and in front of the yoke on the axle is the same. Inbetween these two is a ball and a socket, what the hell is this called? Someone told me a ...
|
| Whats the name of that part??? | 26 Nov 2004 01:41 GMT | 8 |
Hey I have a 92 s-10 blazer. 4x4. I think I need the part that lives under the battery that actuates the front diffential. the truck wont engage in 4 hi or low. Whats the name of the part Thanks
|
| oil change interval for synthetics | 25 Nov 2004 18:51 GMT | 19 |
I am going to convert my trucks to synthetic oils. What mileage interval do synthetic oil users here use? One truck is brand new with almost 1000 miles (an '04 ZR2 Blazer, the other a recently acquired 2001 Silverado 4x4 with a 4.8 and a 5 speed with 50000
|
| Aux input Stock Radio 04 Trailblazer | 25 Nov 2004 08:02 GMT | 5 |
I want to direct wire my XM Roadie to the stock AM/FM/CD in my 04 Trailblazer. Is there an auxiliary jack in the back of the stock radio chassis? Is it a mini-jack or an RCA jack? I currently do not have a cassette unit.
|
| 2000 Blazer 4dr 2WD | 25 Nov 2004 04:28 GMT | 5 |
Hi, our Blazer started to make a sloshing noise when I turn a corner or accelerate hard. It sounds like it is coming from behind the glove box. I checked the AC drain and it is draining ok. I also checked the antifreeze, it is still full and no wet spot on the carpet. Any ...
|
| 1990 GMC Suburban | 25 Nov 2004 03:48 GMT | 3 |
HI All Thanks in advance 1990 GMC Suburban Vehicle has been running smooth no problems except it needs new
|
| strange sound on 98Jimmy | 25 Nov 2004 02:53 GMT | 5 |
I'd really appreciate if someone can give me any advice on the strange grinding/rattling sound I'm getting on my 98 Jimmy, 118000kms/auto trans. This grinding/rattling sound occurs when I'm driving and the transmission shift from 2nd to 3rd. It also can be heard but not as loud ...
|