Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / December 2004

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
fuel gaege03 Dec 2004 03:06 GMT3
Ok this is weird...
1993 silverado sportside 350 V8
This morning coming home from work the needle was one needle thickness
over the half mark with roughly 220km on the odometer.
brake drum used where?03 Dec 2004 01:37 GMT7
We have a new (old) '82 GMC shortbox.
It came from the factory as a 1/2-ton 4x4 with a 305 engine and a
crashbox,
Now it sports 3/4-tons diffs, a 350 and a TH-400.
thanks for vacuum help, now....02 Dec 2004 19:05 GMT2
I've got more vacumm than Hoover now. I appretiate the help.
New problem....My 89 Sub' has a cooling issue. When I bought it last march, It
had plenty of coolent and the temp gauge stayed at 180 when warm with very
little fluctuation. No problems or changes all summer or fall.. ...
Oh crap, flubbed distributor install 85 Chevy Silverado!@#$%02 Dec 2004 19:00 GMT1
Ok, I actually have installed a distributor before on several pontiacs
and this should have been no different but...
I made multiple markings to insure that I pull the distrubutor straight
out and put the new one straight back in yes? I absolutely did not move
fuel question02 Dec 2004 16:54 GMT4
Guys, I know this question is off topic for a chev group, but you guys seem
to be able to come up with the answer to just about anything.
I am helping a friend with a B2600 mazda that quit on him.  We have replaced
the fuel pump, fuel pump strainer and fuel filter.  Fuel pressure is ...
2001 Blazer won't shift into 4WD02 Dec 2004 15:48 GMT3
I have a 2001 Chevy Blazer that will not shift into 4WD, 4HI or auto 4WD.
I've tried everything, shifting from a stop, shifting when in neutral.  It
just stays in 2WD.
Does anyone have suggestions of what to check?  I'm not that car savvy, I
OT:  Music editing question02 Dec 2004 05:07 GMT4
Sorry for the off topic....just figured that
there must be folks that are interested in both
Chevy trucks "and" music editing.
The question is:  can you remove the artist's
2005 Tahoe02 Dec 2004 03:43 GMT3
Just took delivery of a 2005 Tahoe Z71 Black.  Are there any know issues
with them that i should keep my eyes open for.
Thanks,
John
Winter fuel additives02 Dec 2004 02:28 GMT3
I have a few questions regarding a 05 Chevy Duramax. Any insight would be
appreciated so I start in the right direction with the new truck.
I just purchased my first diesel and am interested in the additional (if
any) care I need to perform versus the old gasser I once owned. What ...
Blazer vs Trail Blazer?02 Dec 2004 01:12 GMT15
Mom's getting rid of that peice of  &%$# Ferd Ranger Splash. it's been
nothing but a transmission and 4 wheel drive hell.It needs to take a
Splash in the river. They have the 0% financing going on where I bought
my 3500. She wants a Chevy Blazer. is either of them better than the
Injector noise01 Dec 2004 23:43 GMT15
95 GMC 1500 350ci tbi
For the past month or two I have been trying to track down a tapping sound
that seemed to get louder as my truck warmer.  I have now discovered that it
is coming from the injectors.  Is it normal for an injector to make a fair
GMC Door Handle Problem01 Dec 2004 23:36 GMT3
Well, I broke the interior door handle today.  I know this because it moves
VERY freely and up and down.
SO the question is....where is the best place for me to order the handle for
my 1996 Generically Made Chevy, 1500??
Can I do this swap?01 Dec 2004 00:24 GMT1
Was wondering if anyone knew if it was possible to do a one for one swap of
the front-end and rear-end on a 1987 GMC 4x4 using the front and rear-end
from a 1975 Chevy. pickup? I would like to replace the stock GM 10 bolts
(Front & Rear) with a Dana 44 in front and a GM 12 bolt ...
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 November, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.