| Thread | Last Post | Replies |
|
| need parts | 25 Jan 2005 01:00 GMT | 1 |
I am going to need parts to rebuild a 1998 chevy silverado, a front clip, ext.cab, bed. Does anyone now where i can find these parts around the IOWA state. THANKS
|
| 4WD Error Codes | 24 Jan 2005 21:06 GMT | 12 |
Is there an easy way to get 4wd (blink) error codes for my 4wd 98 blazer, 16 pin odb2? Thanks. _________________________________________________________________
|
| Torsion bars | 24 Jan 2005 03:52 GMT | 1 |
Alright, going to replace the idler arm, pitman arm, outer tie rod and relax the torsion bars on my 91 Silverado. To fit the tires (35's) I am going to trim the fenders a bit. What would be the best way to assure the bars are set the same? Should I
|
| clunking sound when starting | 24 Jan 2005 01:29 GMT | 4 |
It's been cold here the past few days, -19°C without the wind, and when I go and start the truck after it's been sitting for a while I get a clunking sound before it turns over. 1993 silverado 5.7
|
| 3.73 Ratio | 23 Jan 2005 21:44 GMT | 7 |
Anyone have Axle with a 3.73 ratio for sale close to phoenix? for a 1979 Chevrolet Blazer 4x4 w/350
|
| thrashing machine effect | 23 Jan 2005 18:27 GMT | 8 |
My '97 S-10 with big V6 is starting to talk to me on startup. Years ago, when I was a kid and hot rodding, the noise was rockers/lifters. Anyway, I'm hearing what sounds something like rocker/lifter noise on startup, and continuing for maybe a second or two, then it goes away, and
|
| OT - Suwanee, GA. | 23 Jan 2005 16:54 GMT | 25 |
The company that I work for is opening a new manufacturing facility in Suwanee, GA. I'm one of the key players in setting up the facilities and the process equipment. This being said there will be opportunities for employees in my company to
|
| 4x4 fuse blows out | 23 Jan 2005 14:48 GMT | 1 |
I have a 88 gmc 1500 4x4 truck that when you shift it into 4 wheel drive,it blows the fuse out on it.It stayed in for about 14 miles and then the light went out on the console.I then relized that the fuse blew on it so I put another in and then right when the light lit in the ...
|
| stylin concepts | 23 Jan 2005 12:19 GMT | 3 |
has anyone here ever ordered anything from them? were you happy with there stuff? did it fit right? thanks
|
| Chevy Error codes | 23 Jan 2005 04:47 GMT | 5 |
What is error code 12 - "Diagnostic Mode" mean? I have a 88 Chevy Blazer and the service engine light comes on once in a while and that is the error I get when I short the two contacts. Thanks
|
| '96 Chevy Silverado, Intake Manifold Leak | 23 Jan 2005 04:35 GMT | 1 |
Jim Grant's Tech Tips '96 Chevy Silverado, Intake Manifold Leak Q: The intake manifold gasket failed in my '96 Chevy Silverado. What caused the leak? Was it the incompatibility of the Dex-Cool anti-freeze and the
|
| Power windows and locks | 23 Jan 2005 03:01 GMT | 2 |
I have a 1994 Silverado 4x4. The drivers window will not move.The passenger is fine.(power windows and locks). It has been 8 below 0 the past few days.I am hoping it is frozen. My question is the panel that surround the window and door lock controls.I
|
| help fuel pressure | 23 Jan 2005 01:35 GMT | 2 |
Does anyone know what the fuel pressure should be on a 1998 Chevy truck 454. Thanks, Robin
|
| DTC P0125 | 23 Jan 2005 01:30 GMT | 14 |
Used my ODB II code reader to troubleshoot a Service Engine Soon light. It quickly returned the following. P0125 Insufficient coolant temperature for closed loop fuel control
|
| How the mind works.... | 23 Jan 2005 00:52 GMT | 1 |
Got lazy and had a shop redo my front end. Now the suspension feels nice and solid. But even though they only worked on the suspension it seems like the transmission shifts better, the horn works better, and the engine idles smoother. I'm going to wash it tomorrow and expect
|