Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / January 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
garage opener in overhead console on '01 Tahoe22 Jan 2005 23:53 GMT3
I dont have an owners manual with my 2001 Tahoe. How do you use the 3
button garage door openers in the overhead console? How do you set
them, etc.
Thanks,
Rear Differential22 Jan 2005 20:25 GMT11
Rear Differentail ratio for a 79 Blazer 4x4 W/ 350
How do you find out what the ratio is for both Differentials?  
I need to replace the one on the rear of my blazer 4x4
Water pump on 97 5.7L vortec22 Jan 2005 19:31 GMT3
I'm replacing a water pump on my 97 5.7L vortec.  How do you remove the
fan/clutch assembly from the old water pump?
Is there any truth to the rumors I hear about coolant leaking from the lower
intake manifold?  Is it a hit or miss problem or is it something I'll see
engine mounting to transmission22 Jan 2005 02:19 GMT2
Do anyone have cad drawing about engine to transmission mounting face?
I am starting project later this year to replace 4.3 v6 and put Turbodiesel
(not GM) engine in my 92 4x4 Fleetside.
Problem with 03 Silverado 4WD21 Jan 2005 23:02 GMT7
I've got a problem with my 4WD that I'm hoping someone can shed some light
on. The truck's a 2003 Silverado 1500 Z71. When you put it in 4H the truck
makes a moaning sound as you come to a stop. It only does this in 4H and not
in 4 Auto. It made this same noise a year ago and the ...
92 K1500 upper radiator mounts21 Jan 2005 22:54 GMT2
I plan on trying some electric fans and wanted to know if anyone had
some good recommendations on alternative upper radiator mounts.
The OEM mounts for this truck are made with the shroud.  I plan
on removing the shroud to setup the electric fans so I would need
HELP with programming keyless entry for 98 blazer!21 Jan 2005 22:52 GMT2
I have looked everywhere for instructions on programming keyless entry for
a 98 Blazer, and have been very unlucky. I found instructions for the turn
on and turn off way, but that hasn't worked. If anyone has any ideas or
knows how to do it, your help would be greatly appreciated!!
93 4.3L timing21 Jan 2005 21:33 GMT1
I think I have a timing problem. After I timed the truck, I reconnected the
advance wire and looked at where the timing was.  Then I hit the throttle to
see where the timing goes. It came all the way back to 0 and then some.  Is
this normal? I have no power at low rpms when ...
PING "Doc"21 Jan 2005 11:48 GMT6
Hey Doc,
   How ya doing these days?  Still working on that Elky?  I've got another
good one for ya... from a buddy of mine...  He did a valve job on his 258
straight 6 and he must have gotten a wire crossed somewhere when he put it
Radio lock codes21 Jan 2005 04:22 GMT4
I changed the battery in my avalanche and now the radio  is locked.  doews
anyone know how to unlock it, or have the codes and procedure to unlock it?
Thanks, Jim
Disable ABS21 Jan 2005 04:02 GMT5
I have a '98 S-10 Chevy Blazer which needs to go to the shop and have the
ABS sensor changed on one of the front wheels (which means the whole hub
assembly).
They can't get me in until next week.
PING - IAN21 Jan 2005 03:33 GMT3
I posted awhile back about how one gets the additional caster / camber on a
1999 K1500. I knew that the manual said there were knock outs for the upper
control arm that need to be removed in the frame.
How hard are they to remove with out the special GM tool? Also are the knock
02 Blazer - cranks, won't start - fuel filter?21 Jan 2005 03:13 GMT1
Sounds like the fuel pump is coming on, but the car is not getting gas.
Have never replaced a fuel filter, but will try this weekend...anything I
need to know?  If I'm not getting gas, do I need to de-pressurize the fuel
line (remove fuse)?  Do I need to clamp both ends after taking ...
46107 1950's Retro Nostalgia 4610721 Jan 2005 02:52 GMT1
    http://www.vintagevending.com
        The Webs Retro Planet
        The most 1950's original & Reproduction 50's memorabilia and
        Collectibles online
Tail lights21 Jan 2005 02:12 GMT1
I am looking for a good set of LED tail lights. Housings and all. For a 2000
Silverado
Any hints?
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.