| Thread | Last Post | Replies |
|
| GMC Serria Rear Glass | 21 Jan 2005 01:09 GMT | 1 |
I have a 2000 GMC Serria, the dealer installed an after market rear sliding glass window. I want to have the sliding glass removed. The problem is the glass was glued to the body metal. The glassman tells he can remove the after market frame and sliding glass. The
|
| Adding gauges to older truck | 20 Jan 2005 23:01 GMT | 10 |
I am a new Chevy Truck owner and have acquired a '74 C20. I'm overall quite pleased with it, but find the instrument cluster a little lacking. It has a speedometer and fuel gauge, and then those gigantic red lights that come on for Oil Pressure, Water Temp, and Generator. I
|
| Attn Doc | 20 Jan 2005 00:12 GMT | 1 |
Hey i just wanted to say thanks, i took a sawzall and cut the lines on either side of the filter, and ran rubber hose in a loop to a new filter, and it runs like a dream.... i wasnt expecting to pay 7 bucks a foot for gas line... but whatever it solves the problem.... thanks for the
|
| Relay problem 99 Blazer s10 | 20 Jan 2005 00:08 GMT | 1 |
There is a constant clicking noice coming from behind the glove box. I believe it is a blinker relay. Its the same sound the blinker makes, but all the lights work fine. I read that I must remove the airbag fuse and disconect the Connector Position Assurance connector at the base of
|
| FS ads allowed here? | 19 Jan 2005 23:43 GMT | 1 |
Just figured I'd ask first, TIA Snuffy
|
| Thermostat '96 305. 96K | 19 Jan 2005 22:25 GMT | 4 |
Just bought this truck. The owner told me he took the thermostat out for longer engine life. Does this sound funny to you????
|
| Cap. of G80 locking rear end | 19 Jan 2005 15:57 GMT | 4 |
Any idea of the cap. of an 02 G80 locking rear end? I am using Mobil one 75w 90, and have installed 2 qts. The level seems to be about 3/4 to 1" below the bottom of the inlet hole. The manual says for a 2500HD it should be just below the bottom of the hole now, but just
|
| Question: Proper fuel line routing 77 Chev | 19 Jan 2005 14:50 GMT | 3 |
Anyone know the correct fuel line routing for a 77 Chev C-10? I mean, does the fuel line, before it goes into the pump for the 350 V8, mount on the outboard side of the frame rail, or the inboard. After I've driven a while and the engine is warmed up the vehicle
|
| 99 Blazer radiator | 19 Jan 2005 13:26 GMT | 9 |
Just had the radiator replaced due to an internal leak. Now having an tranny fluid leak at the lower connection. Shop says it might be the glue holding the fitting in the tank or the new style floating line connection. If the rad is bad they can get a new one under warranty but
|
| what bulbs are behind the dash? | 19 Jan 2005 05:24 GMT | 13 |
I can't seem to find easy reference to them. Does GM use a typical 194 or 168 type bulb behind the cluster of a 1991 K1500? I've got a couple burnt on the right and cant' see my gas gauge at nite :( owners manual says nothing...
|
| Stolen Yellow 68 | 19 Jan 2005 04:32 GMT | 1 |
Lynwood WA area. Yellow 68 step-side was stolen. REWARD for info........
|
| chevy starters grinding | 19 Jan 2005 03:26 GMT | 2 |
i have 2 chevys with the same starter problem an 85 suburban and 79 scottsdale both 350 v8 we put new starters in and they would sound fine for a few starts and then it would grind horribly even broke a starter we tried shimming in the
|
| Does GM take suggestions? | 18 Jan 2005 22:33 GMT | 2 |
I was wondering if anyone knows of a contact email or website where Chevy or GM takes suggestions concerning new products, styles or designs. I want to put in my two cents worth as to what I think would be a good idea but I can't find anywhere to submit it to them. The closest ...
|
| radio locks | 18 Jan 2005 14:09 GMT | 12 |
I changed the battery in my avalanche and now the radio is locked. doews anyone know how to unlock it, or have the codes and procedure to unlock it? Thanks, Jim
|
| 4.3 swap | 18 Jan 2005 11:30 GMT | 12 |
i own a 1992 S-10 with a 4.3 engine with a 4l60 automatic transmission the engine is equipped with TBI. i would like to replace the engine with an earlier 4.3 with a normal ignition and carburator, so i don`t need the computer anymore ( this thing
|