Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / February 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
one burnt out DRL???06 Feb 2005 08:45 GMT13
I have seen many different Chevy trucks and SUVs in the 2000-2004 range that
have had the passenger side DRL out. then I saw one today with both lit.
Would there be any reason five completely different Chevy's would have this
one light out?
Pads and Rotors05 Feb 2005 22:10 GMT4
Hind sight is 20/20!  I put new front brake pads on my 99 suburban 1500 4x4
about 6K miles ago.  I had the rotors turned and the guy that tuned them
said the one was slightly under spec.  I let it go and sure enough, they are
warped pretty bad now.  Not sure what it is with the ...
steel wheel rating?05 Feb 2005 19:52 GMT1
Anybody know the weight / pressure rating for the steel wheels on '97
Chevy/GMC 1500 4x4s?
Thanks.
LOOK AT WHAT THE GREMLIN GOT05 Feb 2005 16:13 GMT19
http://i1.ebayimg.com/01/i/03/4e/8f/1c_1_b.JPG
/dance
oh yeah... oh yeah... uh uh uh.....
lol
problem not solvet05 Feb 2005 13:32 GMT4
the problem i had with the s-10 4.3 liter 1992 truck is that it will start
right up and dies on me.
after cranking a bit it will start again but there is vibration and the
engine will run rough no misfires it simply drops rpm every once in 10
NEW MFI injector assembly for Silv. 4.3L Vortec05 Feb 2005 04:44 GMT2
I went to the dealership and they said the cause of my misfire was more
than likely 1 or more fuel injectors, especially since it started on the
very cold day, gumming up the poppets on the old injectors.  I guess there
has been a load of these "old injectors" going bad around the ...
Where's the number ?05 Feb 2005 04:31 GMT3
I have a Chevy 350 from about 1983, and before I start scrapping and
cleaning grease and oil off of it, can anyone save me some time and tell me
the location (s ?)
of the engine serial number   ?
Opinions Please! (Doc)04 Feb 2005 16:04 GMT4
Water in oil I've got a lot of cleaning to do.
I got one more head to take off,one on drivers side is off and seemed to
be leaking head gasket so far.Had to stop I got sick and had to go to
doctor.Anyway Doc I was planning on getting the heads reworked.Will I be
Now I am totally baffled04 Feb 2005 14:30 GMT7
Im the guy who had 4x4 problems recently. I am really tight on cash and
haven't had the time/money to get someone to put a scan-tool to find out
what codes, if any, are coming up in my PCM. Now, Its back to the old
symptoms of...it goes into 4LO, but not 4HI (well, when I put it ...
HELP NEEDED on Z-71 POPPING..........PLEASE READ04 Feb 2005 10:34 GMT1
I have a 1996 Chevrolet Z-71 (146, 000 miles) that has developed a
problem. When putting the truck in gear (forward) and/or
taking off, I hear a popping noise from the rear of the truck.
It, also, has developed a vibration at about 60 m.p.h. when
20inch wheels04 Feb 2005 05:04 GMT2
I want to sell my 20inch wheels off my 1998 Tahoe to a coworker who owns a
2003 Tundra truck but I not sure what the wheel pattern of either are.
Anybody  know?  sure can use the help
thanks
New Truck, break-in period??04 Feb 2005 04:28 GMT12
I have a new 2004 Trailblazer, 900 miles on it.  It shifts kinda hard
into drive & reverse.  I had a local mechanic look at this and he said
you need to break it in.  I'm not sure about this, I think the shifting
should be smooth with little bucking. is there truly a break-in period
left headlight only works when beams are set to high04 Feb 2005 04:23 GMT7
I have a ?93 Chevrolet Blazer.  After all these years I?m just now
becoming interested in all things related to vehicle upkeep and
maintenance and troubleshooting.  When I set the beams to high, both
headlights work.  When I dim them, only the right headlight works.  I
98 Checcy Balzer cuts out in overdrive.03 Feb 2005 20:33 GMT11
Group,
Help, I am having a problem with a 1998 Chevy Blazer that is cutting out
when it is in overdrive.  The tach drops about 500 rpms and then comes
back intermittently.  If you downshift it does not exhibit the problem.
vin look up03 Feb 2005 19:50 GMT5
looking for a carfax report on a vin JTEHF21A210031672 anyon­e help me
out.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 January, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.