4 years ago I had my engine rebuilt which included a new radiator and water
pump... I was surprised this week when I checked my anti freeze that it was
rusty...... I'm puzzled as to why this would be the case so soon........ my
mechanic said if he changed it , it would probably just ...

i have a 96 c1500, and the clock on the radio always stays on.  i hasnt
always stayed on, until i rebuilt the engine????? im not sure what that has
to do with it, but it was after that, it stayed on.
the problem with this is, it continues to drain my battery when its cold

I have an 89 k1500 truck I put new ball joints on the passenger side and a
new pitman arm on with new tires, all the other front end parts are in good
shape normal surface rust nothing bent or otherwise damaged, after an
alignment at Sears it pulled to the Right took it back adn ...

If anyone knows, I'm trying to find out which chevy / gmc truck models
had as an option or as standard equipment the type of rear bumper that
had a double ridge along the top, a recessed flat area in the middle,
and an identical double ridge on the bottom.

I have Chevy Blazer 97 model and just found out that I will need to
replace the oil cooling lines.  Can someone tell me the steps how to
change these and maybe the difference in the cost if having it fixed in
a shop.

I need to replace the oil cooler hoses in my 2001 S10 ZR2 (they're leaking)
and found these on eBay.  I went to Schucks and looked at their Haines
manuals but I couldn't find any mention of them anywhere on how to replace
them.  Is there a write-up somewhere so I could do it ...

http://www.turbonator.com/
The write ups look good.
http://www.spiralmax.com/

I'm getting cold air on the passenger side of my 02 Silverado with the
heater on and at highway speeds. The dealer says that the cowl needs
to be resealed with a silicon sealer. They also say that they have had
to do a lot of them. Have any of you run into this?

I've asked a couple of times about the method for programming additional
remotes for my Sierra.
Any leads to where I can find the procedure?

Is there any way to adjust the idle speed?
My truck idles at about 500 rpm which doesn't seem to keep the alternator
spinning fast enough....dash lights dim, head lights dim, a/c and/or fan
speed decrease, etc. However, if i run the rpm up to about 600 - with my

350 V8 TBI, auto trans(rebuilt), 137K miles 2 door extended cab, power
everything, alloy wheels, low-back bucket seats w/console, Catalina blue
w'blue interior, factory AM/FM cass w/equalizeroriginal owner-bought new.
bad: some hail damage on roof and hood, scratches(ex ran the ...

350 V8 TBI, auto trans(rebuilt), 137K miles 2 door extended cab, power
everything, factory alloy wheels, low-back bucket seats w/console, Catalina
blue w/blue interior, factory AM/FM cass w/equalizer, original owner.
bad: some hail damage on roof and hood, scratches(ex ran the ...

I have a brand new 2004 4x4 2500HD. It has only 2350 miles on it and is only
3 months old.
I shifted into 4H from stop in minor amount of snow. I heard a god-awful
grinding, crunching & squealing sound. So I stopped immediately and put it

I'm looking for some experienced advice concerning putting a small
camper on a '97 GMC Sierra 1500 short bed 4x4 with the Z71 'off-road'
package.
I call GMC, gave them my VIN, and they said the dry weight is 4600 lbs,

Just an attempt to share some info.
Went by local GM dealership and looked at an 05 Chev. 1500 pickup.
Opened the hood and was checking out the electric fan setup.  
5.3 V-8.  Truck has two large electric fans mounted in their own