| Thread | Last Post | Replies |
|
| 1990 GMC V1500 Jimmy Flashing Brake Lights | 23 Feb 2005 23:37 GMT | 5 |
1990 GMC V1500 Jimmy 350CUI TBI TH700R4 NP241
|
| Clunk when putting in gear... | 23 Feb 2005 10:23 GMT | 4 |
Got a 91 xcab with the 350 and an automatic in it. When I first put it in gear I get a metallic "clunk". Any ideas?
|
| POPPING and VIBRATION ........PLEASE READ | 23 Feb 2005 10:13 GMT | 3 |
I have a 1996 Chevrolet Z-71 (146, 000 miles) that has developed a problem. When putting the truck in gear (forward) and/or taking off, I hear a popping noise from the rear of the truck. It, also, has developed a vibration at about 60 m.p.h. when
|
| Door latch damage & repair | 23 Feb 2005 08:00 GMT | 5 |
Has anyone here ever repaired a door latch? I have a set ($200 smackers U.S. each for new aftermarket L.M.C. Trucks) and they are worn clean through where the fat part of the end of the door striker pin makes contact.
|
| message count | 23 Feb 2005 06:36 GMT | 3 |
Here's a dumb one. At the bottom of my screen, it says there are 17 messages. There are none. How do I reset the counter and get it back to zero?
|
| cat on my diesel | 23 Feb 2005 06:13 GMT | 4 |
04.5 3/4 ton Chevy diesel I have a catalytic converter. I want to put a bigger exhaust on it. The guy who is going to do it said to remove the cat and do not reuse. Is this cool or I'm I going to be in trouble when I go for my smog test?
|
| '98 'Burb: Bumper Material? | 23 Feb 2005 03:42 GMT | 4 |
Chrome's peeling off big-time...sheets of it rolling up. But that's been going on for a few years now and there's no rust on the exposed metal. Would that be because there's yet another layer of something over the steel?
|
| 1978 Chevy Shortbed | 23 Feb 2005 03:37 GMT | 3 |
I am trying to get some opionions on how much you think this truck is worth... http://buzztrader.com/showad.cgi?1081&1978417192MO_60_2656.dat I really need to sell this truck asap! So if there is anyone interested
|
| 1992 CHEVY TRANSMISSION 4.3 LITER??? | 23 Feb 2005 02:19 GMT | 1 |
WANTING TO KNOW WILL A TRANSMISSION OFF OF A 350 MOTER WILL WORK ON A 4.3
|
| cat on my diesel | 23 Feb 2005 01:41 GMT | 2 |
From: "Jo" <jox61@cox.net> To: "me" <jox61@cox.net> Subject: Re: cat on my diesel Date: Monday, February 21, 2005 5:13 AM
|
| 89 c1500 fuel filter location? | 23 Feb 2005 00:48 GMT | 1 |
Stupid questions: Where is the fuel filter on a 89 c1500 305 auto? how often should it be changed? what is involved in changing it (how do i remove pressure from the
|
| 1992 S10 motor advice | 23 Feb 2005 00:01 GMT | 7 |
I have a 1992 S10 Blazer with 312,000 miles on it. The body is still pretty good. Excellent paint, just some rust starting to appear finally. Entire suspension is new, interior is almost perfect. I want to keep driving it since it's paid for.
|
| Tranny shifts | 22 Feb 2005 23:22 GMT | 1 |
I have an 03 silverado, 4.8 v8 i think it has an 4l80e tranny anyways my problem is that the first shift is like a jolt, but only if im accelerating at a low speed, but if im driving normal, it shifts properly, What may be the problem?
|
| Hummer H2 | 22 Feb 2005 21:46 GMT | 5 |
HUMMER H2 , FULL OPTIONS, SUSPENSION AIR AUTOMATIQUE, ROUE ARRIERE,4X4, CUIR, CLIM., VITRES EL. ,SIEGES EL. A MEMOIRE, 6 CD AVEC BOSE SYSTEM, ORD.DE BORD, ALARME, 7 PLACES,PARE- BUFFLE! DVD 2 ECRANS 1ere issue SEPT 2004
|
| Tranny Problems | 22 Feb 2005 19:19 GMT | 2 |
I have a 2002 Silverado Quadrasteer. Transmission has failed at 25,187 miles, 49,263 miles, and now at 79,362 miles. First two failures were the reaction shell; I suspect the same problem this time, as reverse, 2nd, and 4th gears are out just like the first two times. All
|