Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / February 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
creaking noise while slowing to a stop21 Feb 2005 04:29 GMT2
I have a Reg Cab/short box Sierra. It has a creaking noise in it whenever I
slow to a stop on rough ground while going forward. It creaks during the
last few seconds before the completion of stopping.
It does not happen while going backwards or if I shake the truck (sideways,
FYI:  GM Recall21 Feb 2005 03:53 GMT20
DETROIT ? General Motors Corp. is recalling more than 193,000 vehicles on
the U.S. market to fix a variety of safety defects, federal safety
regulators said Thursday.
The National Highway Traffic Safety Administration said the recalls included
91 Blazer/ 87 Nissan21 Feb 2005 02:54 GMT1
Hi, I have a 91 Blazer 4x4, not bad gas mpg for it's age, about 16-17 in
town, a little better on the highway.  I am looking at a   87 4x4 Nissan for
my son, but the owner said it only gets about 18mpg on the highway.  Doesn't
that sound pretty poor for a little 4cyclinder 5speed?
HP arguement20 Feb 2005 20:15 GMT5
94 suburban 1500. How much HP did the 350 make at the crank? I have been
told 210 and 260, which is it?
Signature

SMOOVE

valve lifters20 Feb 2005 17:20 GMT8
I have got some noise coming from what i think is a lifter.  Is there anyway
to isolate the one making the noise just by looking at it after i get the
intake off???  I have a 97 tahoe 5.7 and the lifters for it are $12 each.
Im trying to get out of this as cheap as possible.  I dont ...
My Chevy works with honey now !!!20 Feb 2005 06:38 GMT9
Yes, I've removed the engine and replaced it by a grizzly bear and now
my Chevy works with honey!
AXLE SEALS19 Feb 2005 23:30 GMT2
Looking to replace front axle seal on passenger side of a 94 GMC 1/2 ton
4x4, do you have to take the whole wheel assembly apart or can you break it
apart at the flange and take it apart from there????
a/c compressor out on '89 3/4 ton what serpentine belt do i use19 Feb 2005 16:08 GMT7
I have an '89 Chevy 3/4 ton with a 350 in it and it had A/C, but the
compressor siezed.  Is there any changes I have to do to get a different
serpentine belt to work bypassing the compressor?  I am afraid that the
tensioner isn't going to work when I bypass the compressor.  Any
91 elect fuel pump always on,????19 Feb 2005 05:12 GMT2
I have a 91 chev 1/2 ton 4x4 with a 6.2 diesel.  I just replaced my
electrical fuel pump, and now I ?m noticing my pump is running all the
time with the engine running! is this normal?????? it?s also pretty
noisy!
12v power source in 03 suburban18 Feb 2005 17:48 GMT2
I'm wireing in a DVD player in my sub.  I was planning on just hooking
up the power to the back side of a cigaret lighter/power source, but I
dont see an easy way to get into any of them.  Where's the best/easiest
source to pull power from?  I will need to run the power near the
ok i found the pro sticker, where can i look it up18 Feb 2005 15:56 GMT1
Thanks to everyone that responded to my earler post. I found the rpo sticker
on my 2001 express van, it's on the passenger door.
Now that i have found it, where can i get a list of what they mean?
thanks
where can i find the rpo sticker18 Feb 2005 10:33 GMT7
1st, Thanks for looking at my post.
I just got a 2001 chevy express 3500. I would like to know if there is an
rpo sticker on the van somewhere? ( my older ones had it in the glove box,
not this one)and where can i get the list that tells me what they mean.
valve lifters18 Feb 2005 06:06 GMT3
I have got some noise coming from what i think is a lifter.  Is there anyway
to isolate the one making the noise just by looking at it after i get the
intake off???  I have a 97 tahoe 5.7 and the lifters for it are $12 each.
Im trying to get out of this as cheap as possible.  I dont ...
Switching from Synthetic ATF to Natural?18 Feb 2005 02:50 GMT12
   About 2 years ago I rebuilt my 700R4 automatic trans in my '88 Chevy
blazer s-10 4x4. As I was completing the job, my brother mentioned to me
that I should put Mobile1 ATF in. Unfortunately he had meant natural Mobile1
whereas I bought synthetic. Obviously synth. is much more ...
Just say NO to Bin Ladin!!!!18 Feb 2005 02:27 GMT1
Hi all I am helping a friend promote a web site. You see a childhood
friend of hers lost her husband at the World Trade Center on Sept. 11,
2001. She has run into some hard times and my freind wants to help her.
So she came up with the idea to market Just say NO to Bin Ladin
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 January, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.