Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / February 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Clunking from third door13 Feb 2005 13:08 GMT5
I have a clunking sound that accompanies pretty much every moderate to large
bump I hit in the road.  Before I take the door apart, has anyone else been
able to successfully quiet the problem themselves?  I hope it's something
fairly obvious and fixable.
1988 S-10 Blazer 4.3<Question?13 Feb 2005 03:54 GMT2
I was getting ready to put my intake manifold back and noticed the rear
coolant ports on the gaskets are blocked off.What's the purpose of them
being blocked?Thanks Bobby
How many Chevys can dive over my penis ????13 Feb 2005 01:14 GMT4
I wonder how many of them can drive over my willy before he will fall off...
Seat help 88-9412 Feb 2005 21:29 GMT1
Hi all... (89 K 2500 std cab, long bd, 5.7 ltr)
   Looking to get some custom seats, buckets preferred (Sparco like). Was
hoping someone
could point me to a link with seat replacement info, or what you replaced
93 Power steering problem12 Feb 2005 20:07 GMT2
I know we've all been through this but I need a refresher. My 93 2WD
Chevy steering worked fine until a week ago. Now it won't steer at low
RPM without a noise like a loose belt and a shudder in the steering
wheel. When the oil is cold (50 degrees) all is normal with no noise
Drive Line Shimmy in '97 S-1012 Feb 2005 18:56 GMT2
I am having problems w/ my '97 S-10 x-cab.  It has a 4cyl, 5 sp. manual
transmission and is giving drive line (or what I think is drive-line)
shimmy/vibration on acceleration.  I really notice it when shifting between
1-2 and 2-3...at higher speeds it seems to even out.  I  had ...
a little help...12 Feb 2005 15:43 GMT12
hey everyone... i have recently fallen on hard times and am asking for
help if u can spare it...
a little over a month ago my father passed from a heart attack... he
was playing ultimate frisby (we live in ga, it stays pretty warm here)
350 chevy motor what is the normal voltage...12 Feb 2005 03:51 GMT2
Output on one of their standard HEI coils?
Intake Manifold Gasket12 Feb 2005 00:57 GMT10
I'm in the process of replacing my intake manifold gasket on my 1998
4.3 S-10 Blazer, mine was leaking, which by the looks of it is a pretty
common problem with these motors.
I bought the gaskets yesterday from NAPA, I beleive they are a Victor
2001 Silverado 3500 Dually w/8.1L11 Feb 2005 21:32 GMT3
Was curious how the mileage is on the 8.1L trucks, 3500 (non-HD) crew cab, dually.  Would like to know towing and non-towing mileage.
I know Diesel is expensive, but how does the mileage/fuel cost balance out?
Signature

EDWARD STAMMER

'96 Suburban 2500 4WD11 Feb 2005 19:24 GMT1
I've got 2 questions about a '96 Suburban I bought in CA and brought to MN
last year and all responses are appreciated.
My truck vibrates (bad) intermittently between 60 and 70. It'll run for 30
seconds vibrating like nuts and then it'll run smooth for 10 minutes. Speed
Brake HELP!!!!11 Feb 2005 07:31 GMT5
Here's the story,, Replaced the rear in my 1985 full size blazer, Bled the
brakes, A week later the pedal is almost to the floor Replaced all the
linning, calipers, master cylinder, wheel cylinders the booster(buddy said
it might be that) I'm at a lose????? Try to bleed the brakes ...
1986 gmc 4x411 Feb 2005 03:29 GMT9
every 2 or 3 days my battery is dead, i had battery checked,alternater
replaced checked all belts...any ideas?
HEI Dist11 Feb 2005 01:45 GMT4
Is it possible to convert a 91 gmc with the 5.7 tbi to run a HEI Distributor
without pissing off the puter too much?  And if it is whats the easiest way
to do it.
Chevy LUV10 Feb 2005 23:32 GMT6
Hey group,  I'm wondering what the similarities between the early 80's Chevy
Luvs and the Isuzu Pups from the same time period?  More specifically the
2.2 liter diesel engines.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 January, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.