| Thread | Last Post | Replies |
|
| Clunking Noise | 31 Mar 2005 17:33 GMT | 2 |
I have a 2000 S-10 4x4 with the 4.3L My problem is a clunking sound which seems to be coming from under the front end. It only happens when the steering wheel is turned hard to the right under initial load.
|
| How do I get through the firewall on 1996 Chevy S10 | 31 Mar 2005 12:35 GMT | 6 |
I have a 96 chevy S10. I need to know how to get through the firewall to hook up hood glow and my fog lights?? We have looked everywhere for a place to go through. Maybe we have overlooked something?
|
| hidden tow hitch? | 31 Mar 2005 11:39 GMT | 5 |
i have a 94 stepside with a roll pan. can anyone give me a model # for any brand of tow hitches that will hide behind the license plate on the pan? thanks, james
|
| 97 Z71: Loud transfer case 'clunk' going from High->Low 4x4 | 31 Mar 2005 06:47 GMT | 2 |
I have a 97 Z71 4x4 I've had since '03. When I push the Hi-Lo 4x4 button that switches between 4x4 Hi and Low, there is a loud clunk or thud from the xfer case. I never thought much of it (works fine) but someone recently said that was not normal. Anyone else have this loud clunk ...
|
| 1993 Safari injectors...? | 31 Mar 2005 05:20 GMT | 1 |
Hey, has anyone out there ever had any problems with the fuel injectors for this model year Safari? I've had to replace mine twice in the past 6 years, is that normal? And if anyone has, how can you prevent them from breaking down?
|
| 89 k5 starter problem | 31 Mar 2005 03:05 GMT | 4 |
The switch turns the stsrter motor, but it doesn't engage. I suspect the starter motor clutch is bad. Is there any suggestion for temporary fix til I can get replacement. I am in the middle of nowhere and a replacement is a couple of weeks away. The truck only has 248,000 miles.. ...
|
| Luck has run out on '99 5.7L | 31 Mar 2005 02:23 GMT | 2 |
You know the story, a '99 5.7L has 79K miles on it and is beginning to lose coolant!!! Changed the oil this evening and discovered white streaks trailing down the front of each side and along the bottom of the oil pan and a closer look shows white powder on the front half of each ...
|
| "92 4x4 manual trans/clutch R&R | 31 Mar 2005 01:49 GMT | 1 |
I have a 1992 1/2 ton 4x4 pick up, w/4.3 cu. in. and 4 speed manual transmission. I am currently replacing the cluch so i removed the transfer case and am trying to get the tranny out but am having a difficult time dropping it down because of the shifter stub. the stub is
|
| Duramax economy 3/4 ton | 30 Mar 2005 16:00 GMT | 3 |
I am looking for an economical truck to use for pulling a 5th wheel and general riding around town. What can I expect in mileage pulling 8,500 lbs and hwy/in town running empty???
|
| 98 Suburban: Remotes program ok but don?t work. ???? | 30 Mar 2005 03:35 GMT | 2 |
I recently bought a 98 Suburban and I have 2 remotes that do not work. Both have good batteries. I have done a bit of research on line, and it does appear that folks here agree that the programming process I tried is the correct one.
|
| New exhust for my 64 ck10 | 30 Mar 2005 03:19 GMT | 1 |
I have a simple, maybe stupid question, concerning adding headers to my truck. My headers collect into a 2.5 inch pipe, to which i am attaching my own steel pipe, the question is do i buy 2.5 inch pipe and flare the ends to fit into the header collector and the mufflers which have ...
|
| Hairline scratches in clearcoat | 30 Mar 2005 03:06 GMT | 4 |
What product(s) do you recommend in repairing scratches in clearcoat? I have a few hairline scratches on the top of my Tahoe. They don't look very deep, but just having them there is annoying me. Thanks,
|
| '87 GMC High Sierra Aux. Tank Problems | 30 Mar 2005 01:04 GMT | 1 |
Not a Chevy, but is a General Motors Vehicle. My '87 GMC High Sierra will no longer switch from one fuel tank to the other. I've replaced the switch but still no go. Anyone have any ideas where to start? Direct emails are welcome. Thanks.
|
| I need a part for my Door.. Help me if you can on how to find?? | 29 Mar 2005 23:40 GMT | 1 |
I really don't know what it is called. Its my 92 z71 When I close my Driver door it will not catch. It does have a sag.. I want to replace the inside door piece that catches
|
| Engine Swap do's and don'ts??? | 29 Mar 2005 23:22 GMT | 3 |
Next weekend, I'll be swapping out my old motor for a rebuilt I picked up at a local machine shop.Vehicle is a 1994 GMC 4X4 350 with AT, TBI, headers. I haven't done an engine swap in a long time and wanted some feedback from those of you that have experience doing a 350 ...
|