| Thread | Last Post | Replies |
|
| 99 Blazer- no floor heat | 25 Mar 2005 03:57 GMT | 2 |
Does anyone know where the dashpot is located that sends the blower air to the floor, as opposed to the windshield ? When I select floor heat, the air comes out the defroster vents instead. Beast I can do is the dashboard exhausts in vent mode.
|
| slightly o.t. chevy mailbu | 25 Mar 2005 01:33 GMT | 2 |
I was having some service work done on my truck the other day, and wondered into the car showroom, to kill some time. I have been looking to buy a new car for my spouse, to replace her aged carmry. The mailibu maxx, caught my eye. The price ,features and ...
|
| 87 blazer, turn signal wire question | 25 Mar 2005 00:26 GMT | 2 |
i have an 87 k5 blazer; the turn signal/cruise control/wiper control stalk has a black wire running from it down through the steering column. What is that for? mine is broke anyway. i am assuming it is for the cruise control,since my cruise control
|
| GMAC - Insurance | 24 Mar 2005 18:22 GMT | 5 |
FINAL NOTICE We are writing to extort you to buy insurance from us at an inflated rate. We did not receive the copy of your insurance policy you provided when you picked up the vehicle. We do not acknowledge the insurance cards or the
|
| Finally a Colorado Lift Kit | 24 Mar 2005 15:52 GMT | 16 |
Fabtech FTS21027 - Now who has the best price on this thing? So far it looks like Summit at 563 + freight.
 Signature ** Public Fishing and Boating Forums
|
| CHIRPPING NOISE | 24 Mar 2005 14:06 GMT | 7 |
I have a 96 S10 with a 4.3 I hear a chirping noise coming from what sounds like the front-end but I can't seem to find it. The problem is intermittent. When it does start 'chirping a slight pressure on the brake pedal will stop it - release the
|
| WTB | 24 Mar 2005 13:11 GMT | 4 |
Looking for a reproduction dash for my 1987 chev full size. Might also be interested in a CAP and front pipe bumper.
|
| chevy seat popping? | 24 Mar 2005 05:57 GMT | 1 |
Hey all, I have a 99 Z71 reg cab with the split bench seat. Anyway, occasionally when i'm turning, and my weight shifts, I hear loud pop/clank from under the seat. The seat seems tight and doesn't move if i try and move it or
|
| Rear Axle Seals | 24 Mar 2005 04:24 GMT | 3 |
My 2002 2wd, 2.2L, 5 Sp Ext. Cab has a leaking rt.axle seal. Do I have to pull the Diff. cover to unhook the axle or can I do it from the outside on the hub? Thanks, Pete
|
| greetings humanoids! | 24 Mar 2005 03:35 GMT | 3 |
1994 chevy s-10 pickup 4.3L motor. has some rust and needs shocks and cleaning. also, horn doesnt work [where is the horn anyway?] and wiper doesnt wipe. fuses appear OK. truck has 250k miles but seems OK.
|
| Rough Country | 24 Mar 2005 02:44 GMT | 2 |
I am looking at getting their 3 inch lift http://rough.roughcountry.com/RC%20Web/99-04Chevy2wd.htm Has any body here used this kit? Are they a good company?
|
| How do I know if my ecm is bad? | 24 Mar 2005 01:43 GMT | 7 |
I have an 87 chev 3/4 ton pu. It was running just fine and then died. Now it won?t start, it?s not getting any fuel I think the ecm isn?t working because I am not getting a check engine signal lite. Deos anyone know how to check the ecm?
|
| code p0440 problem | 24 Mar 2005 01:26 GMT | 1 |
My 2002 blazer check engine light came on, change gas cap reset computer light came on again 56 miles later. Dealer did "smoke test" found no leaks,dealer reset computer and said
|
| 91 chev refit to diesel | 24 Mar 2005 01:12 GMT | 1 |
Would a diesel motor bolt directly to my 700rt tranny or do I have to change the tranny also?
|
| sb chevys/s10 transmissions | 23 Mar 2005 22:25 GMT | 4 |
What stock transmissions will directly bolt up to a sb chevy that came in an 83 s 10? i have an 83 s10 with a 1.9 and a 4 speed manual, but i want to put a sb in it without a tranny, driveshaft and yoke swap. Can anybody help?
|