| Thread | Last Post | Replies |
|
| EPA regs. | 23 Mar 2005 21:20 GMT | 2 |
Having just purchased a new automobile, I'm wondering if anyone can direct me to a site for the EPA and it's rules concering warranty coverage on emission controls and deviced, such as catalytic converters. Several years ago, I read the many of the emission control devices are
|
| Cad engine to Chevy truck? | 23 Mar 2005 21:01 GMT | 2 |
found a good shape '75 Cad 500, w/400 trans, all accesories. will it go into a '76 c10? all wrench work?
|
| no spark | 23 Mar 2005 18:44 GMT | 8 |
hi, i have a 1991 chevy k 1500, with a 5.7 litre engine, and an automatic trans. the problem i have is that i have no spark, there is power at the coil, but none after the distributor, i have changed the coil, distributor, computer, and the wire running from the coil to the
|
| New Chev Truck Owner | 23 Mar 2005 06:24 GMT | 6 |
Hey Guys and Gals: Just wanted to drop a note and say hey from Newfoundland Canada. I just recently purchased a beautiful 1987 3/4 ton 4X4 pickup and I have to say I love it more than I realized I would... Anyhow just wanted to
|
| Transmission problem, I think | 23 Mar 2005 04:58 GMT | 13 |
I have a 72 Chev with a 350 engine, 350 trans. I bought it at least 10 yrs ago. When I accelerate hard from a stop, I feel this scary shuddering coming from somewhere. I have replaced the motor and trans mounts that weren't too good. No difference. I replaced a noisy u-joint ...
|
| 83 S10 wireing diagrams | 23 Mar 2005 03:12 GMT | 5 |
I am working on a project truck it use to have a 2.8 in it and i'm totally rewireing it for a older v-8 the problem is i'm not sure what to keep and what shoud go I would really like any heip or pics that would make this nightmare easer on me i'm doing this with no help and very ...
|
| Spot Lights | 23 Mar 2005 02:56 GMT | 1 |
Does Unity still make spot lights any more or who does?
 Signature b
|
| truck lunges between 50 and 55mph | 23 Mar 2005 02:25 GMT | 1 |
I just bought a 98 chevy 2500 cheyenne diesel and just recently I noticed that it repeatedly "lunges" if I try to keep the speed between 50 and 55. (It feels like I am tapping on the gas and letting off over and over again). It doesn?t do it if I accelerate or if I
|
| 1998 Blazer Anti Freeze | 23 Mar 2005 00:39 GMT | 3 |
Hi all, I'm looking to change out the anti freeze in my 98 Blazer. I was just wondering if it would be all right to switch to regular good old Green anti freeze instead of the crap that GM recommends. What's everyone think about this subject. Also is the drain plug on the ...
|
| changing oil on 2004 venture | 23 Mar 2005 00:29 GMT | 1 |
hi, we bought a 2004 venture van, on this model you have to reset the oil counter so the engine light will be out, is this a tricky procedure or simple to do. will apreciate any advise. thanks, jerry
|
| Stop light, turning ligh | 22 Mar 2005 22:59 GMT | 6 |
Anyone 97 Tahoe-lights does not work on 1 side. Blinker in dash blinks faster than normal. What is the problem? Is it fuse or bulbs. Thank you.
|
| 4x4 shifting question | 22 Mar 2005 18:52 GMT | 14 |
I have a 95 z-71 ext. cab. 350tbi Auto trans.(dont know which tranny it is, maybe somone here does.)Manual 4x4 selector. I was doing a little off-roading this past weekend and got stuck in 2wd. My friend was with me and said I needed to leave the truck in drive and shift into ...
|
| 454 Chev VS. Powerstroke | 22 Mar 2005 18:46 GMT | 6 |
Initail investment to tow 90% of the time 10000 for 1997 K3500 ext cab 454 loaded 58Kmiles 15000 for 1995 F350 4x4 XLT package 158kMiles fuel economy is no brainer, but the fuel oil cost and higher mainante
|
| 97 chevy s10 wouldnt start until I moved it a few feet. | 22 Mar 2005 17:28 GMT | 8 |
Had something funny happen the other night. Went to go start the truck to go home, (It has a new battery) the battery was dead.(all the preset channels had gone away on the stereo) so I decided I would try to kick start it ( the parking lot had a hill) I moved it only about 2
|
| Two piece Driveshaft Question | 22 Mar 2005 15:20 GMT | 3 |
I have a 1995 GMC Sierra extended cab with a long bed and I had to remove the driveshaft to get it rebalanced and have the ujoints and center bearings replaced. My question is what is the correct
|