Hi, lately my 1998 truck's front brakes have been locking up when pressed.
The front wheels won't turn until you bleed them down. Any idea what might
cause this? I haven't owned the truck for too long, only about a month.
Thanks,

I can't find anything in my service manual on this maybe some 4WD guru out
there can help.
I found a vacuum hose on this vehicle that is hanging loose under the
battery tray. The vacuum thing for the differential lockout is hooked up so

I am in the process of adding a computer to my truck ( I spend 60 hours a
week in my truck as my mobile office). If anyone has any links to web sites
w/ what others have done or hardware designed for extreme duty, please let
me know. I will be documenting my installs on a web ...

Hey Guy's,
Is there a safety devise on the fuel pump that shuts it off if the gas tank
is to low in fuel ? ( to keep the pump from burning up. )
thanks

How often do you guys change the oil in the rear diff??
V.B.

i have a standard 100 amp rebuilt alt but it doesn't seem to be doing the
trick. amps, winch, aux lamps, etc all add to the problem. would you suggest
increasing the size of the pulley or replacing the alt with 160 or 180 amp
unit. if you suggest replacing the alt what ...

Well - what does a bad rear wheel bearing sound like....... I'm not sure if
my axle is going bad or my wheel bearings

I recently purchased a 1998 Blazer S10.  While driving the blazer
through the rain, I found that the wipers didn?t work.  The next day,
after wiggling the wiper fuse and starting the truck, the wipers
worked.  A day later the Blazer wouldn?t start, I attempted to quick

I have a 2002  S-10 with 5 speed. Wanted to know if the special GM
syncromesh trans oil is available anywhere aftermarket or only at a dealer?
If available aftermarket, what's it called ?
Thanks , Pete

I have a '88 Suburban .  Intermittent wiper settings don't work, and wipers
will not shut off or park properly unless I  play around with the switch
control  and use the "mist" setting on the control lever.
Here's what I've done...  First changed the multifuntion turn signal lever ...

 I have a 1988 s10 4x4 auto, reg. cab and long box but she is rusted bad
and the hole are starting to get bad.  I have the chance at another body but
it is1984 standard 4x2 ext. cab and short box.  Can I change the cab and
box, and just swap steering collum and 4x4 shifter.  Is ...

I have a 97 S10 extended  4.3 auto, 85,000 km fronts shocks are leaking and
wondered if I would be best to stay OEM or after market ? Wondered who was
making shocks for Chevy/GM .Just a daily driver.
Thanks,Andrew

last week I posted a message saying that the drivers side headlight
wasn't working but the passenger was.  I swapped the lights out and
that didn't make a difference.  A few people suggested trying
different things but ultimately everything lead back to looking for

I am looking for a suburban and I hope I will get some advice in this group
to
narrow down the exact model etc.
I am looking for an older car, from the 80s. It should be reliable and as

Got an old tonneau cover from a friend. it is a soft one with uses
velcro to hold it on. Friend said that when it was on his truck the
wind that came over the cab caused so much down force on the tonneau
that it would come undone.